Meridian America Link/Customer Controlled Routing manual NT7D58 cable pinout Meridian Signal AM J2

174Chapter 9: Meridian Link/CCR interface cabling

SDI Paddle Board cabling (Options 21Ð81 IPE Module only)

Port 3 of the NT1R03AA cable connects to the NT8D41 SDI Paddle Board through an NT8D93A cable and, if additional length is needed, through an NT1R03D extension cable. For pinout of the NT8D93A cable, refer to ÒExternal I/O cable pinoutsÓ in this chapter.

As shown in Figures 45 and 46, the NT6D80 MSDL card connects to the Meridian 1 I/O panel using an NTND27 SCSI II cable. From the Meridian 1 I/O panel, an NT7D58 cable connects to the IPE Module.

The NT7D58 cable has 25-pin male connectors at both ends. Table 55 lists the pin assignments required for the cable.

Table 55

NT7D58 cable pinout

Meridian 1	Signal	AM (J2)
1	Shield	1
2	TXD	2
3	RXD	3
4	RTS	4
5	CTS	5
6	DSR	6
7	LRTN	7
8	DCD	8
15	STC	15
17	SCR	17
20	DTR	20
24	SCTE	24

For more information about the NT8D41 SDI Paddle Board, refer to NT8D4 SDI Paddle Board (NTP 553-3001-181).

553-3202-210 Standard October 1998