Meridian America Link/Customer Controlled Routing manual Insert medium prompt, Software Management

Chapter 14: Software installation, upgrade, and update procedures 459

Procedure 8: Load the application software from tape (continued)

Figure 226

Software management menu

		SOFTWARE MANAGEMENT
1	installpkg	install new software package onto built-in disk
2	listpkg	list packages already installed
3	removepkg	remove previously installed package from built-in disk

Enter a number, a name, the initial part of a name, or ? or <number>? for HELP, q to QUIT:

5At the software management menu, type 1 and press [Return] to select the install option.

Figure 227

Drive selection menu

Select which		drive to use:
1	ctape		2 diskette1	3	hddiskette1
Enter	a number, a		name, the initial part of a		name, or
? for	HELP,	q to	QUIT:

6You are prompted to select a drive. Type 1 and press [Return] to select the ctape (cassette tape) option.

Figure 228

Insert medium prompt

Insert the removable medium for the package you want to install into the ctape drive.

Press <RETURN> when ready. Type q to quit.

7You are prompted to insert the medium. Insert the application tape (tape 2 of 2) into the tape drive and wait until the tape indicator light turns off.

Once the tape is inserted correctly and the latch is completely closed, the tape indicator light goes on, flashes briefly, then goes off again. Wait until the light goes off before proceeding to the next step.

Meridian Link Release 5C/CCR Release 3C Installation and Upgrade Guide