Meridian America Link/Customer Controlled Routing manual X25, Hdlc, Lapb

490Chapter 15: Link configuration

Procedure 14: Changing Meridian Link (link 1) parameters (continued)

Table 142

X.25 and LAPB parametersÑLink 1

Link parameter	Allowed values		Description
	(defaults in parentheses)
X.25, LAPB parameters
Protocol*	X25, HDLC	Link protocol used
Link type*	2	Type of link (2 = Host Link)
Machine ID	x25dest, hdlcdest	Logical name assigned to the
		attached host
Delay	(0)Ð9999	Maximum time (in seconds)
		between packet transmissions
Port type*	X, H	X = X.25, H = HDLC
Physical DTE/DCE	0, 1	0 if link port is configured as
		DTE; 1 if the port is configured
		as DCE
PDN type	0, 40Ð48	Packet data network type. This
		parameter is dependent on the
		type of X.25 network configured
		on the host. Possible values are:
		0 Ñ LAPB
		40	Ñ Datex-P (Germany)
		41	Ñ Transpac (France)
		42	Ñ PPS (United Kingdom)
		43	Ñ Datapak (Sweden)
		44	Ñ Telenet (USA)
		45	Ñ DDN (USA)
		46	Ñ Accunet (USA)
		47	Ñ Datapac (Canada)
		48	Ñ Tymnet (USA)
		The default values are 0 for
		LAPB and 44 for X.25.
Note: Parameters marked with an asterisk (*) cannot be changed.
	Ñ continued Ñ

553-3202-210 Standard October 1998