NOTE: During reassembly, align the chute assembly by facing it towards the plastic retaining ring. Be sure the chute is positioned all the way to the right or left upon re-assembly. See Figure 27.

Retaining Ring

12.2.Using a 1/2” socket, remove the four bolts and spacers attaching the engine to the left side of frame. See Figure 29.

Engine Mounting Bolts (4)

Figure 27

Check that the upper and lower flanges lock into the retaining ring and that the latch closes and locks prop- erly. See Figure 28.

Figure 29

12.3.Using a 1/2” socket, Remove the two bolts securing the lower base of the engine to the sup- port bracket welded to the wheel axle.

Lower Engine Mounting Bolts

Figure 28

12.ENGINE REMOVAL

12.1.Remove the discharge chute and engine cowl- ing.

8