Ryobi RY30560, SS30, RY30540 manual Warranty, This Product WAS Manufactured with a Catalyst Muffler

Page 23

TROUBLESHOOTING

Problem

Possible Cause

Solution

Spool retainer hard to turn

Screw threads are dirty or

Clean threads and lubricate with grease — if no

 

damaged.

improvement, replace the spool retainer.

 

 

 

Grass wraps around drive shaft

Cutting tall grass at ground level.

Cut tall grass from the top down to prevent wrapping.

housing and string head.

Operating trimmer at part throttle.

Operate trimmer at full throttle.

 

 

 

 

WARRANTY

THIS PRODUCT WAS MANUFACTURED WITH A CATALYST MUFFLER

Congratulations! You have made an investment toward protecting the environment. In order to maintain this product’s original emission level, please refer to the maintenance section below.

 

EMISSIONS MAINTENANCE SCHEDULE AND WARRANTED PARTS LIST

 

Emissions Parts

Inspect Before

Clean Every

Replace

Clean Every

Replace Every

 

Each Use

5 Hours

Every 25 Hours

25 Hours

50 Hours

 

 

 

or Yearly

or Yearly

 

CATALYST MUFFLER ASSEMBLY

 

 

X

AIR FILTER ASSY

 

 

 

 

 

includes:

 

 

 

 

 

Filter

X

X

 

 

SPARK SCREEN

 

 

X

 

FUEL TANK ASSY

 

 

 

 

 

includes:

 

 

 

 

 

Fuel Lines

X

 

 

 

 

Fuel Cap

X

 

 

 

 

IGNITION ASSY

 

 

 

 

 

includes:

 

 

 

 

 

Spark Plug

 

X

 

 

ALL EMISSIONS-RELATED PARTS ARE WARRANTED FOR TWO YEARS OR FOR THE PERIOD OF TIME PRIOR TO THE PARTS FIRST SCHEDULED REPLACEMENT WHICHEVER COMES FIRST.

CALL US FIRST

For any questions about operating or maintaining your product,

call the Ryobi® Help Line!

Your product has been fully tested prior to shipment

to ensure your complete satisfaction.

23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents Save this Manual for Future Reference OPERATOR’S ManualIntroduction Table of ContentsRead ALL Instructions General Safety RulesSpecific Safety Rules for BRUSH- Cutter and Blade USE Specific Safety RulesSpecific Safety Rules for Trimmer USE Symbol Name Explanation SymbolsSymbol Signal Meaning ServiceString Head CouplerKnob Features Assembly See Figure Installing the Power Head to the AttachmentRemoving the Attachment from the Power Head Attaching the Storage HangerFlat Washer Attaching the Front Handle − CS30 and SS30Attaching the J Handle − BC30 Front Handle Bolt Wing NUT ClampAttaching the Brushcutter Guard − BC30 Attaching the Grass DeflectorTo Attach the Curved Shaft Grass Deflector − CS30 To Attach the Straight Shaft Grass Deflector − SS30Converting from String Trimmer to Brushcutter − BC30 Attaching the Shoulder Harness − BC30Converting from Brushcutter to String Trimmer − BC30 Removing the TRI-ARCBLADE and Brushcutter GuardRemoving the Straight Shaft Grass Deflector and String Head Installing the TRI-ARCBLADE and Brushcutter GuardOperation Operating the Trimmer Fueling and Refueling the TrimmerGrass Deflector Line Trimming CUT-OFF Blade To Advance the Cutting LineTo Advance the Cutting Line Manually Cutting TipsCutting Technique − Blade Operating the BrushcutterBlade Thrust TRI-ARCBLADETo Stop the Engine Starting and StoppingSee Figures 21 See Figures 23 MaintenanceGeneral Maintenance Spool ReplacementFirst String Slot String ReplacementSee Figures 25 Arrows on Spool Anchor HoleSpark Arrestor Cleaning the Exhaust Port and MufflerReplacing and Cleaning AIR Filter Spark Plug ReplacementIdle Speed Screw TroubleshootingThis Product WAS Manufactured with a Catalyst Muffler WarrantyLimited Warranty Statement MANUFACTURER’S Warranty Coverage Service
Top Page Image Contents