You deserve the very finest, System.3D.E. Filters

System:.3®D.E. Filters

An up-close look

Top-mounted pressure gauge is conveniently positioned for easy reading.

Stands tough year after year

Dura-Glas™, Sta-Rite’s exclusive high-density composite resin, will never corrode and weathers the elements.

Safe, easy access

Posi-Lok™clamps provide safe, easy access to the filter module. 50/50 split-tank design provides extra room for cleaning and service. Fast in, fast out!

Powerfully smooth

2" plumbing ports improve hydraulic flow, which allows the pump to work more efficiently.

Attractive by design	.	®	D.E. filter
Sleek, contemporary styling makes the System:3

blend beautifully with any poolscape.

You deserve the very finest

The System.3® D.E. filter removes dirt particles up to 10 times smaller than the particles removed by sand and cartridge filters. The internal multi-grid assembly captures virtually every kind of particle contaminant typically found in pool water. No other D.E. filter does a better job! Compared to some other D.E. filters, the System.3 is less complicated to service. If you’re the do-it-yourself type, you save time. If you leave the maintenance to a pool service, saving time means saving money!

Less maintenance . . .YES!

The balanced-flow tank design directs water through both sides of each filter grid, which increases dirt- loading without clogging. And that means a longer time between cleanings.

One-step cleaning

For quick and easy cleaning, simply move the valve selector to the backwash position—that’s it! In seconds, your System.3 is at work, keeping your water crystal clear.

Filter Performance

	For Pools		Optimal1	D.E. Required2
	up to (Gal.)	Filter Area	Performance	D.E. Required2
Model	8 Hr. Turnover	(Sq. Ft.)	at this GPM	(lbs.)

S7D75	36,000	37	56	3.7

S8D110	51,000	53	80	5.3

1Operating at this GPM will provide the longest filter cycles combined with the best and greatest dirt-loading capacity.

2Do not use more D.E. than shown here. Mixed results with D.E. alternatives.

Operating Limits—Maximum continual operating pressure is 50 PSI. For pool/ spa (bather) applications, the maximum operating water temperature within the filter is 104°F (40°C).

One-year limited warranty. See warranty for details.

Available from:

www.staritepool.com

Phone: 800-831-7133 Fax: 800-284-4151

pumps / filters / heaters / heat pumps / automation / lighting / cleaners / sanitizers / maintenance products

4/08 Part # P1-717