X-Micro Tech IEEE 802.11b user manual Terminology

Page 4

USER’S MANUAL OF X-MICRO WLAN 11b BROADBAND ROUTER

Version: 2.6

 

 

 

Terminology

 

 

AES

Advanced Encryption Standard

 

ANSI

American National Standards Institute

 

AP

Access Point

 

CCK

Complementary Code Keying

 

CSMA/CA

Carrier Sense Multiple Access/ Collision Avoidance

 

CSMA/CD

Carrier Sense Multiple Access/ Collision Detection

 

DHCP

Dynamic Host Configuration Protocol

 

DSSS

Direct Sequence Spread Spectrum

 

EAP

Extensible Authentication Protocol

 

FCC

Federal Communications Commission

 

FTP

File Transfer Protocol

 

IEEE

Institute of Electrical and Electronic Engineers

 

IP

Internet Protocol

 

ISM

Industrial, Scientific and Medical

 

LAN

Local Area Network

 

MAC

Media Access Control

 

NAT

Network Address Translation

 

NT

Network Termination

 

PPTP

Point to Point Tunneling Protocol

 

PSD

Power Spectral Density

 

RF

Radio Frequency

 

SNR

Signal to Noise Ratio

 

SSID

Service Set Identification

 

TCP

Transmission Control Protocol

 

TFTP

Trivial File Transfer Protocol

 

TKIP

Temporal Key Integrity Protocol

 

UPNP

Universal Plug and Play

 

WDS

Wireless Distribution System

 

WEP

Wired Equivalent Privacy

 

WLAN

Wireless Local Area Network

 

WPA

Wi-Fi Protected Access

 

iv

Image 4
Contents Ieee 802.11b Wlan 11b Broadband Router Ieee 802.11b Trademarks Terminology Table of Contents Frequently Asked Questions FAQ Package contents Product SpecificationsProduct Features Front Panel DescriptionWAN ACT LED Antenna Reset WAN LAN Power Rear Panel DescriptionHardware Installation Software InstallationSoftware configuration For OS of Microsoft Windows NT Connect to the X-Micro Wlan 11b Broadband Router DescriptionBssid Wireless Basic Settings Wireless Advanced Settings Shared Key or Auto selectionWireless Security Setup Click to select the Long Preamble or Short PreambleTKIP? Screen snapshot Set WEP Key Wireless Access Control ItemDescriptionWDS Setup LAN Interface Setup Screen snapshot LAN Interface Setup WAN Interface Setup Static IPDNS Address assigned automatically from a Dhcp server Are Continuous, Connect on Demand and Manual three If you select the PPPoE and Connect on DemandPPTPOnly in Firmware-1.6x Firewall Port Filtering Protocol CommentsFirewall IP Filtering Firewall MAC Filtering Firewall Port Forwarding Port Range Firewall DMZComment Statistics DMZ Host IP AddressUpgrade Firmware Sent PacketsSave/ Reload Settings Select FilePassword Setup User Name What and how to find my PC’s IP and MAC address? What is Wireless LAN?How does wireless networking work? What are ISM bands?What is BSSID? What is ESSID?What are the Open System and Shared Key authentications? What is WEP?What is RTS Request To Send Threshold? What is Beacon Interval?What is Ssid Broadcast? What is Preamble Type?What is Wi-Fi Protected Access WPA? What is 802.1x Authentication? What is Temporal Key Integrity Protocol TKIP?What is Advanced Encryption Standard AES? What is Inter-Access Point Protocol IAPP?What is Maximum Transmission Unit MTU Size? What is Universal Plug and Play uPNP?What is Clone MAC Address?

IEEE 802.11b specifications

X-Micro Tech's IEEE 802.11b standard represents a significant advancement in wireless networking technology, forming part of the IEEE 802.11 family designated for wireless local area networks (WLAN). Introduced in the late 1990s, the 802.11b standard was a precursor to modern wireless technologies, bringing considerable improvements in speed, range, and reliability.

One of the main features of IEEE 802.11b is its data transmission capability, achieving speeds of up to 11 Mbps. While this may seem modest by today's standards, it was a groundbreaking advancement that allowed users to access the internet and share files wirelessly at previously unattainable speeds. Additionally, 802.11b supports lower data rates—5.5 Mbps and 2 Mbps—which enhance reliability and range, allowing devices further from the access point to maintain connections.

The technology operates in the 2.4 GHz frequency band, a characteristic that facilitates better penetration through walls and physical barriers. However, this frequency band is also shared with other appliances, such as microwaves and Bluetooth devices, which can lead to interference. Despite this, the standard incorporates a robust form of modulation, specifically complementary code keying (CCK), which enhances its resilience against such interference.

Another significant aspect of IEEE 802.11b is its capacity for extended range. Under optimal conditions, devices can communicate over distances of up to 300 feet indoors and up to 1,000 feet outdoors. This extended range was particularly useful in homes and offices, promoting seamless integration of devices into networks without the cumbersome wiring typically associated with traditional networking.

Security has always been a critical concern in wireless communications. IEEE 802.11b introduced Wired Equivalent Privacy (WEP) for basic data protection. However, limitations in WEP led to the development of more secure protocols such as WPA and WPA2 in later iterations of wireless standards.

In summary, X-Micro Tech's IEEE 802.11b standard laid the groundwork for modern wireless networking. Its key features, such as a maximum data rate of 11 Mbps, compatibility with the 2.4 GHz frequency band, and extended range capabilities, revolutionized network access in homes and businesses. Even as technology has evolved, the impact of 802.11b can still be felt, serving as a building block for subsequent wireless advancements, making it a significant milestone in the history of networking technology.