Designed for Chemical duty applications

Designed for

chemical duty applications

Toshiba’s EQPIII-840 addresses the special requirements of the mill and chemical industries where motor performance and reliability are imperative. Motor performance is unmatched offering 20 to 1 constant torque, oversized bearings, IP54 or IP55 protection, Class-F insulation system and NEMA

EXTREME MOTOR PRODUCTS Premium® design. The EQPIII-840™ is the clear choice for your toughest environments and applications.

Construction	Insulation System	Nameplate	Bearing System	Conduit Box

•Cast Iron Frame and Bearing Brackets

•Shaft/Slinger Bearing Protection 140 to 280 Frame

•Multi-Mount Construction

•Gasket Provided Between Motor Frame and Conduit Box

•Typical Unfiltered Vibration Levels of

0.06Inches/Second or Less

•Protective Coating on All Internal Machined Surfaces

•IP54 or IP55 Protection

•Breather Drains

•System’s Major Components Made from Class-H Materials

•Low Loss Electrical Steel with 1000ºF Burnout Capability

•System Meeting NEMA MG1 Part 31

•Voltage Withstand Capability of 2000 V in 0.1 µs

•Large Thermal Margin for Extended Life and Reliability

•Phase Paper and Coil Bracing on Both Ends on All Ratings

•Heavy-Build Class-H Varnish with Additional Insulation Barrier

•Stainless Steel

•NEMA Premium® Design

•Raised Letters for Clarity

•Inverter Duty Rating on Nameplate

(1 to 200 HP, 4 & 6 Pole)

•Separate Lubrication Label

•Re-Greaseable Oversized 300 Series Bearings, on All Frames

•Low Temperature Rise for Extended Life

•L-10 Bearing Life of 150,000 Hours Direct Coupled

•L-10 Bearing Life of 50,000 Hours Belted

•Inpro/Seal® 320 Frame and Larger, Both Ends

•Open Regreaseable Bearings 210 Frame and Larger

•Gasketed Cast Iron

•UL Ground Lug

•Lead Separation Protection

•Terminal Lugs on Frames 210 and Larger

Testing

•100% No-Load Commercial Test on all Motors

•On 440 Frame and Larger:

-Vibration Test Report

-100% of Bearings are Ball-Pass Frequency Tested

•Commercial Test Report Supplied with Motor

MOTORS ADJUSTABLE SPEED DRIVES CONTROLS UPS

INSTRUMENTATION

PLC

INDUSTRIAL DIVISION

13131 West Little York Road, Houston, Texas 77041 Tel 713/466-0277 Fax 713/466-8773

US 800/231-1412 Canada 800/872-2192 Mexico 01/800/527-1204 www.toshiba.com/ind

Available Through:

*LVMXS840080210*