DJ Scan Operating Instructions | American DJ DMX-512 specs

DJScan™SetUpCont.

Special Note: For excessive cable runs of 100ft. total or more, we recommend using a termi-

nator of 80-100 ohms/.5w. Long cable runs can sometimes cause erratic behavior. Using a cable ter- minator will decrease the possibilities of erratic behavior.

XLR MALE SOCKET		XLR FEMALE SOCKET
1 EARTH	2 COLD	2 COLD	1 EARTH
	HOT 3		3 HOT

Figure 2

XLR Pin Configuration:

Pin 1 = Shield

Pin 2 = Data Compliment (negative)

Pin 3 = Data True (positive)

For best results use fog or special effects smoke to enhance the beams projections. The DJ Scan™ comes with a protective transportation cover. Be sure to remove it before attempt- ing any operation!

DJScan™OperatingInstructions

Stand-Alone Operation (Sound Active):

1.To operate as a stand alone unit, via its internal chases and microphone, turn all dip switches off (see Diagram1).

2.Adjust the sensitivity knob on the bottom of the unit so the unit will react to sound.

3.The DJ Scan™ will now react to the bass sound of music via the internal microphone.

Master-Slave Operation (Sound Active):

1.This function will allow you to link up to 16 units to run on the master units internal programs.

2.In Master-Slave operation one unit will act as the controlling unit and the others will react to the controlling units programs. Any unit can act as a Master or as a Slave.

3.Daisy chain your units via the XLR connector on the bottom of the units.

4.Use standard XLR microphone cables to link your units together. Remember that the Male XLR connector is the input and the Female XLR connector is the output.

5.The first unit in the chain (master) will use the female XLR connector only - The last unit in the chain will use the male XLR connector only.

6.Turn all the master units dip switches to the off position (see Page 6/Diagram1).

7.Please follow chart on page 4 for all slave dipswitch settings. Note only one fixture may use the master units dip switch settings (see Page 4/Diagram1).

8.After all the units settings have been set and are plugged in, adjust the sensitivity knob on the bottom of the master unit to make them react to sound.

Note: Stand-Alone and Master -Slave operation require sound to activate!

American DJ Supply ®. Los Angeles, CA. 90058 USA DJ Scan Page 3

DMX-512 specifications

The American DJ DMX-512 is a pivotal innovation in the world of lighting control, catering to both amateur and professional lighting designers and DJs. This DMX controller is engineered to enhance the precision and flexibility with which lighting designs can be executed, making it an essential tool for clubs, concert venues, and various events.

One of the standout features of the DMX-512 is its ability to control up to 512 channels. This level of control allows users to manage a wide array of lighting fixtures such as moving heads, dimmers, and LED lights, enabling the creation of intricate and colorful lighting displays. The device supports control protocols that adhere to the DMX512 standard, which is a widely accepted communication protocol in the entertainment lighting technology field.

The DMX-512 controller is equipped with a user-friendly interface that makes it accessible even for those who may not have extensive experience in lighting design. Key components include a built-in LCD screen that provides clear visual feedback about the current settings, and intuitive buttons that allow for quick navigation through various programming options. The device also features faders for manual control of lighting intensity, which empowers users to make real-time adjustments during performances.

Another important characteristic of the American DJ DMX-512 is its versatility. It supports various modes, including stand-alone, sound active, and master/slave modes. This functionality enables users to set up automated shows or synchronize lighting with music, adding dynamic visual effects to any event.

In terms of connectivity, the DMX-512 comes with multiple DMX output ports, allowing for easy daisy-chaining of multiple fixtures. Its robust build quality ensures durability even in demanding environments, making it a reliable choice for touring DJs and event planners alike.

Additionally, the device is backward compatible, allowing it to work seamlessly with older DMX equipment, further extending its utility. Overall, the American DJ DMX-512 stands out as a comprehensive solution for controlling lighting in various settings, thanks to its advanced features, user-friendly design, and exceptional flexibility in control options. Whether setting the mood for a party or creating a dramatic atmosphere for a live performance, the DMX-512 is an indispensable tool for any lighting professional.