Canon EOS 620-650 AF Control System:, AF Working Range:, AF Auxiliary Light:, Shutter:, Shutter Speed:, Self-timer:, Film Loading:, Film Wind:, Film Winding Mode:, Film Rewind:

Page 14

Canon EOS 620 - 650 camera manual

AF Control System:

 

TTL-SIR (TTL secondary imaged registration) phase-detection type using BASIS (base- 

stored image sensor). AF operation starts when the shutter button is pressed halfway. AF in-

focus indicator lights upon ranging completion. Audible indicator (electronic beeper) can be 

turned on and off. 

Three selectable modes: 

1. ONE SHOT: AF operation ends and focus is locked once ranging is completed. Shutter 

does not release until ranging is completed. 

2. SERVO: Focus continuously adjusts to follow the subject movement. Shutter can be 

released at any time regardless of ranging completion. 

3. Manual: By rotating the manual focusing ring after focus mode switch is set to "M". 

AF Working Range: 

EV 1 - 18 at ISO 100  

AF Auxiliary Light:

 

The ultra-bright red LED (peak sensitivity: 700 nm) is automatically projected with specified 

Canon Speedlites. 

Shutter:

 

Vertical-travel focal plane shutter with soft-touch electromagnetic release. All speeds 

electronically controlled. 

Shutter Speed:

 

EOS650--1/2000--30 sees and bulb. X-sync is 1/125 sec. Can be set in 1/2-step increments. 

EOS 620--1/4000--30 sees and bulb. X-sync is 1/250 sec. Can be set in 1/2-step 

increments. 

Self-timer:

 

Electronically controlled with a delay of approx. 10 sees indicated by blinking LED operation 

confirmation lamp. 

Film Loading:

 

After film positioning and back cover closure, the film automatically advances to the first 

usable frame and then stops (approx. 1.5 sees) 

Film Wind:

 

Automatic using the built-in miniature motor. Confirmation by the film transport bar marks 

in the display panel. 

Film Winding Mode:

 

Two selectable modes; S (single exposure) and C (continuous exposure at the maximum 

speed of approx. three frames per second). 

Film Rewind:

 

Automatic using the built-in miniature motor. Starts when the film end is reached and then 

stops (with 24-exp. film, approx. 10 sees with the EOS 650 and approx. 7 sees with the EOS 

620). Mid-roll rewind performed by pressing the film rewind button. 

 

file:///D|/copy_topcities/chinon/canon_620-650/canon_eos_620-650-3.htm (13 of 15)1/9/2005 1:18:39 PM

Image 14