You can set up a register number which consists of 2 figures.
n1 n2 - #/NS
Example. Set up this register number as 30.
3 0 #/NX
NOTE !! After depressing the CASH/TEND key,
you can finish setting up function in PGM mode.
*. . . . . . . . 3 0 # 0 0 0 0 0 3
1 5 . 2 5 | 3 0 |
The default state of this program is the RECEIPT status.
This means that the receipt is issued with stamp.
If you select the JOURNAL status, the stamp is not operational.
It works by toggle with the PO key in X mode.
See the follows.
9 9 9 9 PO
PROGRAMMING
You can confirm what you have set up to now.
By pressing the CASH/TEND key without any other key in PGM mode.
* TURN CONTROL LOCK POSITION TO PGM MODE.
Now, you are ready to operate the register.
PROGRAMMING CONTENTS
30