Remote control
Remote Control Operation
Insert two AAA/1.5V batteries into the remote control. Point the remote control at the remote sensor on the front panel. The remote control works within a distance of about 7 metres from the sensor and within an angle of about 30 degrees from the left and right side.
Battery Installation
1 Remove the battery compartment cover on the back of the remote control.
2Load the batteries into the battery compartment making sure that the
batteries have been inserted with the correct polarities matching the symbols +,
-as indicated inside the battery compartment.
3 Replace the cover.
Note:
Remove the batteries when you do not intend to use the remote control for a long time.
Do not mix new and used batteries, or different types of batteries.
Weak batteries can leak and severely damage the remote control.
Be environmentally friendly and dispose of batteries according to your government regulations.