RS-232 PROTOCOL COMMANDS
Standby Mode
Note: Turning the unit System Power Off over RS232 will blank the displays leaving only the Power
cept and act upon switching commands. This allows you to set up a scene before soft powering on the unit and enabling the video outputs. The unit will still return status and change messages in response to commands sent while in System.
Power Off mode
SBSYSMON- Put system into Standby (Soft Power Off)
SBSYSMOF- Bring unit out of Standby (Soft Power On)
SBALOFAK
SBALONAK
FRONT PANEL LOCK
Note : Hard resetting the unit will unlock the Front Panel controls. SBSYSMLK- When front panel is locked, changes can only be made by Rs232
SBSYSMUK
SBSYSLOK- Front Panel has been Locked
SBSYSULK
SBSYSMLK- Reset every output to Input 1
SBRSTACK
6