3.Restart the computer.
4.Once your computer is back up, plug the camera into your computer's USB port.
5.
Click on hardware and then Device Manager.
If the camera is installed correctly, there will be a category listed for "Imaging Devices" and clicking on the "+" next to it should reveal your camera. If not, you will likely see "Digital Still Camera" under "Other Devices" with a brightly colored marking next to it indicating it is not functioning correctly.
Right click on the non functioning device and select uninstall. If a warning pops up, press OK.
6.Restart your computer again. Your camera is now successfully installed.
Q:How do I make sure I don't lose important pictures?
•Your camera uses flash memory which requires a constant electric current to store your photos. Should your camera lose power (for instance if the battery dies or is removed) all stored pictures will be lost. We
-25 -