Bushnell 26-2024 Scope will not turn on, Image is not focused, Visibility decreases or disappears

Page 2

TROUBLESHOOTING

Scope will not turn on.

Check that the battery is installed properly. Replace the battery with new ones. Check the battery contact to ensure it is clean and free of corrosion. Check that the power is in the "ON" position.

Image is not focused.

Adjust the focus on the Eyepiece (4). Adjust the Objective Lens Focusing Ring. If still no improvement, clean the lenses; they may be foggy or dusty.

Visibility decreases or disappears.

Bright light sources such as headlights may cause visibility to degrade or disappear completely. Turn the Power OFF (2) and turn the scope away from the light source. The unit will restore itself in 1 or 2 minutes. Conditions such as fog or extremely dark environments will decrease visibility.

Scope flashes.

The scope may flash when used in a bright environment. It may also flash during the first few seconds of use in dark environments.

CARE AND MAINTENANCE

Your Bushnell Night Vision device was designed to provide many years of reliable service. To ensure that you get the most enjoyment out of your Night Vision device, always obey the following warning and precautions:

Do not point this device toward any light source greater than 1 lux such as car headlights, for an extended period of time. This device utilizes an internal flash protection system, which minimizes potential damage, but long-term exposure to bright lights can damage the unit. Any such damage may void your warranty.

This device was designed to be self-contained. Do not open the body of the device or otherwise attempt to service this device.

Always store the device in a dry, well-ventilated room.

Remove the battery if the device is to be stored for longer than 2 months.

Keep the device away from any heating and air conditioning vents or other heating devices, direct sunlight, and moisture.

Avoid dropping or otherwise shocking the unit. Although designed for rugged outdoor use, this device incorporates a sophisticated optical system, which could be damaged in extreme cases of misuse.

Clean the optical lenses with professional lens cleaning supplies.

Clean the exterior of the device with a soft clean cloth.

SPECIFICATIONS

Magnification:

2.0 X

Objective Size:

24 mm

Vertical Resolution:

36 line/mm

Viewing Range (Ft.)*:

5–400 ft.

Range of Built-In Infrared Illuminator:

100 yards

Field of View:

105 feet at 100 yards

Battery Type:

CR123 (1)

Operating Time:

Up to 20 hours

Temperature Range:

-22º to 104º F / -30º to 40º Celsius

Eyepiece Adjustment:

+/- 5 diopter

Length:

5.6 inches / 142mm

Width:

3.2 inches / 82mm

Height:

2.4 inches / 60mm

Weight:

10.6 oz. / 0.3 kg

*Maximum distance at which a human figure can be recognized under ideal viewing conditions; defined as clear conditions (no fog, dust, etc.) under the light of 1/4 moon.

WARRANTY / REPAIR

TWO-YEAR LIMITED WARRANTY

Your Bushnell® product is warranted to be free of defects in materials and workmanship for two years after the date of purchase. In the event of a defect under this warranty, we will, at our option, repair or replace the product, provided that you return the product postage prepaid. This warranty does not cover damages caused by misuse, improper handling, installation, or maintenance provided by someone other than a Bushnell Authorized Service Department.

Any return made under this warranty must be accompanied by the items listed below:

1)A check/money order in the amount of $10.00 to cover the cost of postage and handling

2)Name and address for product return

3)An explanation of the defect

4)Proof of Date Purchased

5)Product should be well packed in a sturdy outside shipping carton, to prevent damage in transit, with return postage prepaid to the address listed below:

IN U.S.A. SEND TO:

IN CANADA SEND TO:

Bushnell Performance Optics

Bushnell Performance Optics

Attn.: Repairs

Attn.: Repairs

8500 Marshall Drive

25A East Pearce Street, Unit 1

Lenexa, Kansas 66214

Richmond Hill, Ontario L4B 2M9

For products purchased outside the United States or Canada please contact your local dealer for applicable warranty information. In Europe you may also contact Bushnell at: BUSHNELL Performance Optics Gmbh

European Service Centre

MORSESTRASSE 4 D- 50769 KÖLN GERMANY

Tél: +49 (0) 221 709 939 3

Fax: +49 (0) 221 709 939 8

This warranty gives you specific legal rights.

You may have other rights which vary from country to country.

©2003 Bushnell Performance Optics

Class 1 LED product per IEC 60825-1/nov 1993, appendix EN 60825-1A11/oct1996

Image 2
Contents HOW Night Vision Works Installing BatteriesUse and Testing Getting StartedVisibility decreases or disappears Scope will not turn onImage is not focused Scope flashes