Panasonic DVD-S43 Audio menu, Display menu, Others menu, Changing the player settings

∫ “AUDIO” menu

SETTING STATE	Display the current setting of the items below
PCM OUTPUT	UP TO 48 kHz:
Check the digital input	When connected to equipment compatible with
limitations of the	44.1 or 48 kHz
equipment you connect	UP TO 96 kHz:
using COAXIAL terminal	When connected to equipment compatible with
and select the maximum	88.2 or 96 kHz
sampling frequency of	≥Signals from copy-protected discs are converted to
PCM digital output.	48 or 44.1 kHz.
	≥Some equipment cannot handle sampling
	frequencies of 88.2 kHz, even if they can handle 96
	kHz. Read your equipment’s operating instructions for
	details.
DOLBY DIGITAL	BITSTREAM	Select “BITSTREAM” when the
With COAXIAL		equipment can decode the bitstream
connections (➜ 7)	PCM	(digital form of multi-channel data).
		Otherwise, select “PCM”. (If the
DTS	BITSTREAM
		bitstream is output to the equipment
With COAXIAL
		without a decoder, high levels of
connections (➜ 7)	PCM
		noise can be output and may
		damage your speakers and hearing.)
DYNAMIC RANGE	ON: Adjusts for clarity even when the volume is low
	through compressing the range of the lowest
	sound level and the highest sound level.
	Convenient for late night viewing. (Only works
	with DOLBY DIGITAL)
	OFF

∫“DISPLAY” menu

SETTING STATE	Display the current setting of the items below
LANGUAGE	ENGLISH FRANÇAIS ESPAÑOL

∫“OTHERS” menu

SETTING STATE	Display the current setting of the items below
REGISTRATION	You need this registration code to purchase and play DivX
Displays the unit’s	Video-on-Demand (VOD) content.
registration code.	Select “SHOW CODE” and press [ENTER].
	(➜ 13, About DivX VOD content)
JPEG TIME	To change the slideshow timing
	1 SEC to 15 SEC (in 1 unit)
	15 SEC to 60 SEC (in 5 unit)
	60 SEC to 180 SEC (in 30 unit)
	≥“3 SEC” is the factory preset.
FL DIMMER	BRIGHT
Changes the	DIM
brightness of the	AUTO: The display is dimmed, but brightens only when you
unit’s display.		perform some operations.
AUTO POWER OFF	ON:	The unit switches to standby mode after about 30
	OFF	minutes in the stop mode.
QUICK SETUP	Select “SET” and press [ENTER].
DVD–VR/DATA	DVD–VR:To play [DVD-VR]on DVD-RAM.
	DATA:	To play [MP3] or [JPEG] contents on DVD-RAM.
DEFAULTS	Select “RESET” and press [ENTER].
This returns all	The password screen is shown if “RATINGS” (➜ 16) is set.
values in the setup	Please enter the same password with the numbered buttons,
menus to the default	then press [ENTER], then turn the unit off and on again.
settings.

§1 The original language designed on the disc is selected. §2 Input a code number referring to the table (➜ 18).

§3 If the language selected for “AUDIO” is not available, subtitles appear in that language (If available on the disc).

Changing the player settings

RQTC0115

17