Kawasaki 840273 Attaching Wheels with Depressed Centers, Attaching Wire Brushes, Edge Grinding

Page 7

ATTACHING WHEELS WITH DEPRESSED CENTERS

WARNING Always check the tool warning label for the recommend- ed speed rating on accessories. Never run a wheel or brush over the rated speed. Accessories exceeding the recommended speed may fly apart and cause serious personal injury.

Hubbed wheels do not require mounting flanges.

• Place the backing washer over the spindle making sure the fit is tight.

• Place the grinding or cutting disc on the top of the backing washer ensuring the bore fits into the step of the flange.

• Mount the concave recess side of the locking nut over the spindle.

•

Press the spindle lock firm and

 

 

insure there is no movement in the

 

 

spindle. Then while the spindle lock

 

 

is depressed tighten the locking nut

 

 

in a clockwise direction using the

 

 

pin spanner.

 

•

Allow the Angle Grinder to run in

SPINDLE

LOCK

 

idle for at least a minute with the

 

BUTTON

 

grinding or cutting disc correctly

 

 

assembled.

 

ATTACHING WIRE BRUSHES

Wire cup brushes, not included, can be screwed directly on the spindle. No flanges are necessary.

EDGE GRINDING

WARNING Do not use edge grinding wheels for cut-off work, deep grinding or subject them to any side pressure as this may lead to breakage and possible personal injury. These wheels should be used for shallow cutting and notching (less than 1/2" in depth). Keep the open side of the guard away from the operator at all times.

Edge grinding should only be done with wheels specifically designed for this purpose.

REMOVING GUARD FOR SANDING OR USING FLAT WIRE BRUSHES

•Set the Angle Grinder on a flat surface with the spindle facing up.

•Remove the inner and outer flanges, unscrew spring washer and remove the guard.

•Store these parts carefully.

•Replace the guard after the job is finished.

ATTACHING SANDING DISC

• To remove the guard, see instructions given in the “Removing Guard for Sanding or Using Flat Wire Brushes” Section above.

• Set the inner flange and outer flange on the spindle.

• Push in the spindle lock button. Turn the spindle until it locks into place.

• Once the spindle is locked, tighten the sanding disc by hand.

OPERATING THE ANGLE GRINDER

Always unplug the tool before attempting to change the guard or accessories.

11

12

Page 6 Page 8
Image 7
Page 6 Page 8
Contents AMP Angle Grinder Intended USE Table of ContentsRecognize Safety SYMBOLS, Words and Labels CongratulationsWork Area Important SafeguardsElectrical Safety Save These Instructions for Future ReferenceSafety Rules for Angle Grinders Personal SafetyService Specific Safety Rules AND/OR SymbolsVolts Voltage Potential Amperes Current Hertz SymbolsSymbol Name Explanation Ring Selector SettingsAttaching Auxiliary Handle AssemblyFunctional Description Component Model NumberEdge Grinding Attaching Wire BrushesRemoving Guard for Sanding or Using Flat Wire Brushes Attaching Wheels with Depressed CentersUsing the Angle Grinder Operating the ON/OFF SwitchMaintenance and Cleaning Other Consumer DO-IT-YOURSELF DIY Tools AccessoriesSpecifications AmpereExclusions Year Limited WarrantyWarranty Performance Commercial or Rental PurposeLimitations on Warranty Disclaimers Warranty DisclaimersLimitation Of Liability

840273 specifications

The Kawasaki 840273 is a powerful industrial engine designed to deliver exceptional performance and reliability across various applications. Renowned for its durability, this engine is particularly suitable for heavy-duty equipment, including construction machinery, agricultural vehicles, and power generators.

One of the standout features of the Kawasaki 840273 is its robust construction. Engineered with high-quality materials, it boasts a cast iron block and cylinder head that ensure long-lasting performance even in the most demanding environments. This durability not only extends the lifespan of the engine but also reduces the frequency of maintenance required, translating to lower operational costs for businesses.

In terms of technology, the Kawasaki 840273 employs advanced fuel injection systems that optimize fuel efficiency and power output. This precise fuel delivery enhances combustion efficiency, resulting in improved torque characteristics and reduced emissions. The engine’s turbocharging capability further amplifies its performance, allowing it to maintain high power levels even at lower RPMs, making it an ideal choice for applications requiring immediate responsiveness.

Another significant characteristic of the Kawasaki 840273 is its ease of integration into existing systems. The engine is designed with versatility in mind, featuring standard mounting points and electrical connections that streamline installation. This adaptability ensures that operators can quickly incorporate the engine into various setups without extensive modifications.

The Kawasaki 840273 also prioritizes operator comfort and safety, equipped with comprehensive monitoring systems that provide real-time data on engine parameters. This enhances overall efficiency and empowers users to make informed decisions, ultimately improving productivity. Additionally, the engine’s design minimizes vibration and noise levels, creating a more pleasant working environment.

Moreover, the Kawasaki 840273 complies with stringent environmental regulations, making it a responsible choice for businesses aiming to reduce their carbon footprint. Its design minimizes harmful emissions and optimizes fuel consumption, aligning perfectly with the modern industry's push towards sustainability.

In conclusion, the Kawasaki 840273 stands out as a leading choice for industries requiring a dependable and efficient industrial engine. With its combination of advanced technology, robust build quality, user-friendly features, and environmental compliance, it continues to set the standard for performance and reliability in various applications.
Top Page Image Contents