BENDIX TCH-005-001 specs

C.Turn the external ¾” adjusting hex in the direction indicated by the arrow on the crank arm, until the brake chamber push rod enters the slack adjuster yoke assembly. The end of the brake chamber push rod should enter the yoke assembly and be even with the surface of the throat of the yoke. See Fig. #2.

D.Run the Sure Stroke yoke adapter up the brake chamber push rod until it enters the yoke assembly fully and tighten.

E.Run the brake chamber push rod lock nut up to the yoke adapter and tighten it.

F.After installing the Sure Stroke, check that the arm of the slack adjuster forms a 90º angle with the brake chamber push rod at approximately mid stroke of the brake chamber. The following is a suggested procedure to establish this condition.

1.With the brake chamber in the released position and the Sure Stroke installed, place a Square (or equivalent object) along the brake chamber push rod as shown in Fig. #3.

2.If the distance measured is less than shown in Fig. #3, the Brake Chamber push rod must be shortened. If the measured distance is greater than shown, the brake chamber push rod must be replaced with an appropriately longer assembly.

G.Once the proper positioning of the Sure Stroke is obtained, the initial manual adjustment must be made using the ¾” manual adjuster hex. After the initial adjustment is complete, no further manual adjustment is necessary.

H.With the “Sure Stoke” installed, check for sufficient clearance. (Brake chamber push rod in the released and full stroke position.)

I.Manually uncage the spring brakes before returning the vehicle to service.

Note: For additional information regarding operation, maintenance and testing, obtain a copy of Instruction and Service Data Sheet SD-83, from the nearest authorized Bendix outlet.

TCH-005-001 specifications

The BENDIX TCH-005-001 is a sophisticated component designed for use in advanced transportation systems, particularly in the automotive and aerospace industries. Renowned for its reliability and precision, the TCH-005-001 combines state-of-the-art technologies with robust engineering to enhance vehicle performance and safety.

One of the main features of the BENDIX TCH-005-001 is its intelligent sensor technology. This device is equipped with advanced sensing capabilities that allow for real-time data acquisition and processing. This means it can monitor various parameters within the vehicle, such as temperature, pressure, and fluid levels. By providing immediate feedback to the vehicle's control system, the TCH-005-001 helps optimize performance and prevent potential failures, ensuring a smoother driving experience.

The TCH-005-001 also includes sophisticated communication protocols, enabling seamless integration with other vehicle components. Its compatibility with CAN (Controller Area Network) and LIN (Local Interconnect Network) protocols ensures that it can communicate effectively, allowing for coordinated operation with other systems. This feature is crucial for modern vehicles, which rely on a networked approach to manage complex functions and enhance overall safety.

In terms of build quality, the TCH-005-001 is constructed from high-grade materials that provide durability and resistance to wear and tear. This ensures the device can withstand harsh environmental conditions, making it suitable for diverse applications in both automotive and industrial settings.

Another significant characteristic of the BENDIX TCH-005-001 is its energy efficiency. Designed to minimize power consumption, this device plays a pivotal role in enhancing overall vehicle efficiency, contributing to lower emissions and improved fuel economy. This aspect is particularly important in today’s market, where sustainability is a growing concern among consumers and manufacturers alike.

Moreover, the user-friendly design of the TCH-005-001 facilitates easy installation and maintenance, making it a preferred choice among engineers and technicians. Its compact size and lightweight nature do not compromise its performance, which further enhances its appeal in various applications.

In summary, the BENDIX TCH-005-001 is a cutting-edge device that embodies the latest advancements in sensor technology, communication protocols, durability, and energy efficiency. Its impressive features make it an essential component for modern transportation systems, paving the way for safer, more efficient, and sustainable vehicle operation.