Lennox International Inc OSR20, OF20, 020 instruction

Technical

OIL KITS AND ACCESSORIES	u,e._,o
Litho	U.S.A.

@1993Lennox Industries Inc.	503,004M
	503,004M
Dallas, Texas	40732H093
	9/93

020 SERIES HEAT EXCHANGER

CLEAN-OUT KIT

INSTALLATION INSTRUCTIONS FOR HEAT EXCHANGER

CLEAN-OUT KIT (54J98) USED ON ALL 020 SERIES UNITS.

1- Clean-out brush

1- Length of vinyl tubing

This kit is may be used to clean the heat exchanger on any 020, OSR20 or OF20 series oil furnace.

1- Turn off electrical power and oil supply to the furnace.

2- Remove flue pipe section connecting furnace to

chimney. Clean as necessary with clean-out brush and vacuum.

3- If the furnace is equipped with a flue box, remove the flue box cover by removing two screws. Carefully clean the flue box cover.

4- Adapt the enclosed vinyl tubing so that it may be connected to a vacuum. It is used as an attach ment.

5- Use the vacuum to clean around the flue exit of the heat exchanger.

6- Remove six sheet metal screws securing the framing of the flue collector box or flue collar to the heat exchanger. Remove framing or collar.

NOTE - For rear-flue models, remove square clean-out access panel on unit vestibule panel by removing six screws. Clean-out plate will now be exposed. Remove eight nuts and washers that secure the clean-out plate to the heat exchanger. Carefully

remove clean-out plate and gasket from heat exchanger. If gasket is damaged it must be replaced. The heat exchanger passageways are now accessible for cleaning.

7- Replace the six screw previously removed. This will seal the heat exchanger to the vest panel and will not allow soot to fall into the furnace cabinet during the rest of the clean-out procedure.

8- Continue cleaning the heat exchanger through the flue exit with the kit supplied brush. Work the brush through one side of the radiator and then through the other. Repeat this step so that the entire radiator surface is covered.

9- Remove clean-out brush and use your vacuum with vinyl hose attachment to sweep out the radiator. Work hose through one side of the radiator, then the other. Repeat the previous two

steps until all soot and debris are removed from radiator.

10-The crossover section of the heat exchanger between the inner drum and radiator should be cleaned next. Open the inspection door on the unit and position the clean-out brush in a slightly upward position. The brush end should enter the crossover section. Clean this area thoroughly.

NOTE - For rear flue models, the heat exchanger

crossover is exposed for easy cleaning when clean-out plate is removed.

11-Inspect the combustion chamber for soot by disconnecting oil line then remove burner. DO NOT USE BRUSH INSIDE COMBUSTION

CHAMBER! Carefully vacuum soot from the chamber. Once the furnace is put back into operation, the heat from the flame should burn the rest of the soot from the combustion chamber.

12- Replace oil burner and connect oil line.

13- Replace flue collector framing or collar and install flue connector cover using the six screws previously removed.

NOTE - For rear-flue models, replace gasket,

clean-out cover plate (using the eight nuts and washers) and clean-out access panel (using the six screws).

14-Replace flue pipe section connecting furnace to chimney, seal all joints with approved sealant materials for the application.

15-Turn on power and oil supply.

16-Refer to unit installation instructions for proper furnace operation and performance.

Page1

020, OF20, OSR20 specifications

Lennox International Inc, a leader in the HVAC (Heating, Ventilation, and Air Conditioning) industry, showcases its commitment to innovation and efficiency with the release of the OF20,020 and OSR20 models. These advanced systems are designed to meet the diverse needs of residential and commercial customers, setting new standards in energy efficiency and user comfort.

The Lennox OF20,020 is engineered for optimal performance. One of its standout features is the advanced Inverter Technology, which allows the system to adjust its capacity based on the actual cooling or heating requirements of the space. This capability not only ensures a consistent temperature but also significantly reduces energy consumption, making it a wise choice for environmentally conscious consumers.

In parallel, the OSR20 model is designed for enhanced indoor air quality and comfort. It integrates a multi-stage filtration system that effectively captures airborne particles, allergens, and pollutants, thereby ensuring that occupants breathe cleaner air. The unit also features Quiet Operation technology, which minimizes noise levels, allowing for a peaceful indoor environment.

Both models incorporate smart connectivity features, allowing users to control their HVAC systems remotely via mobile applications. This functionality enables homeowners and building managers to monitor and manage energy use, ensuring maximum efficiency and convenience. The systems are also compatible with smart home technologies, further enhancing their functionality and appeal.

Durability is another critical characteristic of Lennox's offerings. The OF20,020 and OSR20 are constructed with high-quality materials designed to withstand the rigors of daily use, ensuring a long lifespan and reliable performance. Additionally, Lennox provides extensive warranties and support, offering peace of mind to customers.

Moreover, implementation of sustainable technologies is at the core of Lennox's mission. Both models are designed to meet or exceed the stringent energy efficiency standards set by regulatory bodies, which not only helps in reducing operational costs but also contributes to a greener planet.

In conclusion, Lennox International Inc's OF20,020 and OSR20 models embody innovation, efficiency, and sustainability, making them ideal choices for those seeking improved comfort and air quality in their spaces. Their combination of advanced technologies, user-friendly features, and commitment to durability showcases Lennox's dedication to delivering superior HVAC solutions. Whether for residential or commercial use, these models are poised to redefine the industry standards and elevate user experience.