Kenmore 251.25012 Power ON/OFF, Cycle Timer Setting, FAN Speed, Bucket Full Indicator, Humidity

® ® ® ®®®

® ® ® ® ®

® ® ®

®

POWER ON/OFF (1)

Pressing Power button once turns the dehumidifier "ON" and pressing it again turns the dehumidifier "OFF."

Setting (2)

By pressing this button, unit will cycle through each setting with every press. The order d settings are Humidity - Cycle Timer- Delay Start - Humidity ...

Humidity (9)

When the unit is turned on, the unit will default to Humidity mode. In this setting, Humidity allows you to manually set the desired humidity level by using the humidity arrow or key (4/5). Humidity values are changed in 5% increments ranging from 35% to 70%. Humidity is shown in window (8). When pressing v arrow key when the value is 35%, the unit will operate continuously, tn this continuous operation, Lo will be displayed in the window (8). To leave continuous operation, press the arrow up or change the setting.

Cycle Timer Setting (10)

In this setting, the unit will run for

either 3, 6, or 12 hours, then shut offfor 3, 6, or 12 hours. Cycle time can be adjusted by pushing the timer arrow up or down (4/5) repeatedly to set operating time for 3, 6, or 12 hours. The cycle timer function will continue until you change the setting or turn the unit off.

Delay Start (11)

Unit can be programmed to turn on at a desired delay time by pushing the timer arrow and key (4/5). Time can be adjusted in 1 hour increments ranging from 1 to 12 hours. Delay time will be shown in window (8) and will count down to start time in 1 hour increments.

FAN SPEED (3)

Press Fan Speed to toggle between Low and High fan speeds. Speed will be shown in FAN SPEED INDICATOR (6).

BUCKET FULL INDICATOR (7).

When the collection bucket is full, BUCKET FULL indicator (7) will come on. The dehumidifier will not run until the bucket is empty.

IMPORTANT:

When the unit is turned off and restarted, the unit will operate at the previous operation setting,

NOTICE:

A power failure will require the unit to be turned back on manually and adjusted to the desired setting.

POWER ON/OFF (1)

Pressing Power button once turns the

dehumidifier "ON" and pressing it again turns the dehumidifier "OFF."

Setting (2)

By pressing this button, unit will cycle through each setting with every press. The order of settings are Auto - Humidity - Cycle Timer- Delay Start - Auto ...

Auto (9)

When the unit is turned on, the unit will default to Auto mode. AUTO (9) and "50%" humidity value will be displayed in window (8). In this setting, humidity level is automatically set for 50% RH. Because lower temperatures usually correlate with lower humidity levels, the unit will not run frequently. At higher temperatures higher humidity is normal so the unit will run more often.

Humidity (9)

In this setting, Humidityallows you to manually set the desired humidity level by using the humidity

Varrow or key (4/5). Humidityvaluesare changed in 5% increments ranging from 35% to 70%. Humidity is shown in window (8). When pressing arrow keywhenthevalueis 35%,theunitwill operate continuously. In this continuous operation, Lo will be displayed in the window (8). To leave contin- uous operation,pressthe arrow up or changethe setting.

Cycle Timer Setting (10)

In this setting, the unit will run for either 3, 6, or 12 hours, then shut offfor 3, 6, or 12 hours. Cycle time can be adjusted by pushing the timer arrow up or down (4!5) repeatedly to set operating time for 3, 6, or 12 hours. The cycle timer function will continue until you change the setting or turn the unit off.

Delay Start (11)

Unit can be programmed to turn on at a desired delay time by pushing the timer arrow and key (4/5). Time can be adjusted in 1 hour increments ranging from 1 to 12 hours. Delay time will be shown in window (8) and will count down to start time in 1 hour increments.

FAN SPEED (3)

Press Fan Speed to toggle between Auto, Low, and High fan speeds. Speed will be shown in FAN SPEED INDICATOR (6). When AUTO is selected, the unit wilt adjust the fan speed accordingly depending on the humidity level.

BUCKET FULL INDICATOR (7)

When the collection bucket is full, BUCKET FULL indicator (7) will come on. The dehumidifier will not run until the bucket is empty.

IMPORTANT:

When the unit is tumed off and restarted, the unit will operate at the previous operation setting.

NOTICE:

A power failure will require the unit to be turned back on manually and adjusted to the desired setting.

8 9