Standard Features

Project ___________________________________

Item _____________________________________

Quantity _ ________________________________

CSI Section 11400

Approved _ _______________________________

Date _____________________________________

Options &

Accessories

Delfield™®

Specification Line®

Self-Contained Solid Door Refrigerated Roll-Thru

Models

One section	Two section	Three section
SSRRT1-S	SSRRT2-S	SSRRT3-S	Stainless exterior and interior full door
SARRT1-S	SARRT2-S	SARRT3-S	Stainless exterior and aluminum interior full door
SMRRT1-S	SMRRT2-S	SMRRT3-S	Stainless front aluminum exterior and interior full door

Specification Line®:

SSRRT1-S

•Stainless steel interior and exterior (SS)

•Stainless steel exterior, aluminum

	interior (SA)	•
	• Aluminum interior and exterior, stainless	•
	front (SM)	•
	front (SM)
	• Built in door locks with heavy duty	•
	strikes	•
	strikes	•
	• Recessed metal door handle	•
	• Recessed metal door handle	•
	• Pressure relief valve is standard to	•
	• Pressure relief valve is standard to	•
	prevent door vapor lock	•
	prevent door vapor lock	•
	• Exterior digital thermometer with high/	•
	• Exterior digital thermometer with high/
	low temperature alarm
	• Easy to use electronic control
	• Easy access “flip up” shroud

•Tough ABS interior door liners

•10’ attached cord and plug on 115V units

•Stainless steel breaker strips

•High density foamed in place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane keeps energy costs low

•Energy savings door heater switch

•Two year parts & labor warranty

•Five year compressor warranty

Security (prison) package Door field rehingability Laminate on front, sides and back

Bottom mount electrical Stainless steel banking strip Heat shield end

230-50-1 electrical

220-60-1 electrical

Solid Door

Specifications

Exterior: SS and SA models shall have corrosion resistant stainless steel exterior cabinet sides, front and shroud. SM models shall have corrosion resistant aluminum on exterior cabinet sides and will have stainless front and shroud. All units shall have the upper shroud hinged with a gas assist stay open feature to provide easy access to the refrigeration system.

Interior: Cabinet interior shall be corrosion resistant stainless steel (SS models) or heavy gauge aluminum (SA and SM models). Bottom and top surfaces shall be die stamped to provide radius corners and recessed floor. Mounted to the interior ceiling, the interior incandescent light is controlled automatically through a switch mounted in the hinge assembly to protect against breakage. Door openings are protected with heavy gauge stainless steel breaker strips. An air duct shall be mounted to the ceiling assuring low velocity, even air movement throughout the cabinet interior.

Each section can accommodate a 28 1/2” x 27 1/4” x 72” cart.

Doors: Exterior shall be corrosion resistant stainless steel. Interior liner shall be resilient high impact ABS material formed to protrude beyond the door gasket to protect the gasket from tearing. Each door has two edge mount, self closing, cam lift style hinges. Doors can be removed from the cabinet without the use of tools. Metal door handle shall be recessed into the door for easy grip without

impacting aisle space. Keyed door lock is mounted in the door next to the handle. Lock engages into a heavy duty strike mounted to the cabinet face. Door gaskets are magnetic and mount to the door snapping in place and are removable without tools.

Refrigeration system: All components are mounted to the exterior of the cabinet ceiling, outside the food zone and are assembled

as one piece and can be removed as one piece. Environmentally friendly R404A refrigerant is used. The system has the capability of maintaining between 27ºF and 40ºF in heavy use food service operations. Refrigerant is metered using a highly responsive thermostatic expansion valve. System is controlled using Delfield’s ACT-Advanced Control Technology electronic temperature control, which provides improved pull down times, reduces compressor cycling and longer compressor life with lower energy consumption.

Control system uses adaptive defrost to assure evaporator coil is free of ice and is operating at optimum efficiency. Evaporator condensate is eliminated using an energy efficient hot gas system.

Electrical: Standard electrical on one and two section units shall be 115V, 60 Hz single phase. A 10’ cord and plug is supplied and attached to a junction box mounted on the exterior top of the cabinet. Three section units shall be 115/208-230 and will require hardwire connections.

Refrigerated Roll-Thru

980 S. Isabella Rd.	Phone: 800-733-8948 or 989-773-7981	www.delfield.com
Mt. Pleasant, Michigan 48858
	Fax: 800-669-0619

SARRT2-S, SARRT3-S, SARRT1-S, SMRRT1-S, SMRRT2-S specifications

The Delfield SSRRT series, including the SSRRT3-S, SSRRT2-S, SSRRT1-S, SMRRT3-S, and SMRRT2-S, represents a range of premium refrigerated equipment designed specifically for the foodservice industry. These models excel in providing reliable temperature control, ensuring that perishable food items are maintained at optimal freshness throughout their service.

One of the standout features of the SSRRT series is its advanced refrigeration technology. Utilizing high-efficiency compressors and environmentally friendly refrigerants, these units operate quietly while consuming less energy. This not only reduces operational costs but also aligns with sustainability goals, making them an excellent choice for eco-conscious establishments.

The SSRRT3-S, with its three-compartment design, is perfect for businesses that require expansive storage space. It efficiently keeps different food items organized and easily accessible. The SSRRT2-S and SSRRT1-S, on the other hand, provide flexibility for smaller operations or specialized tasks, ensuring that users can select a model that best fits their needs while maintaining exceptional cooling performance.

All models in the SSRRT series feature durable stainless steel construction, providing longevity and ease of cleaning. The enhanced insulation helps provide superior temperature retention, reducing the workload on the compressor and further contributing to energy efficiency.

The SMRRT models, specifically designed for more compact spaces, still incorporate the same high standards of performance and reliability. Both the SMRRT3-S and SMRRT2-S maintain the same superb temperature control while fitting seamlessly into tighter kitchen configurations.

In terms of usability, the Delfield SSRRT series is designed with user-friendly controls, allowing staff to easily adjust settings for different food storage requirements. The digital display enables quick monitoring of internal temperatures, ensuring compliance with health and safety regulations.

Overall, the Delfield SSRRT and SMRRT series offer a comprehensive solution for any food service operation looking to enhance their storage capabilities without sacrificing quality, efficiency, or safety. These models embody the perfect blend of advanced technology, robust construction, and practical design to meet the demanding needs of today's commercial kitchens.