Safety Rules, LEA EL Instructivo | Woods Equipment 211716 specs

SAFETY RULES

ATTENTION! BECOME ALERT! YOUR SAFETY IS INVOLVED!

Make sure that all operating and service person-

!LEA EL INSTRUCTIVO!

nel know that if hydraulic fluid penetrates skin, it

must be surgically removed as soon as possible by

Si no lee Ingles, pida ayuda a

a doctor familiar with this form of injury or gan-

alguien que si lo lea para que le

grene, serious injury, or death will result. CON-

traduzca las medidas de seguridad.

TACT A PHYSICIAN IMMEDIATELY IF FLUID

ENTERS SKIN OR EYES. DO NOT DELAY.

Check that all hardware is properly installed.

Safety is a primary concern in the design and

Always tighten to torque chart specifications

manufacture of our products. Unfortunately, our

unless instructed otherwise in this manual.

efforts to provide safe equipment can be wiped

out by an operator’s single careless act.

Air in hydraulic systems can cause erratic oper-

In addition to the

design

and configuration

ation and allows loads or equipment components

to drop unexpectedly. When connecting equipment

equipment, hazard control and accident preven-

or hoses or performing any hydraulic maintenance,

tion are dependent upon the awareness, con-

purge any air in hydraulic system by operating all

cern,

judgement,

and

proper training

hydraulic functions several times. Do this before

personnel involved in the operation, transport,

putting into service or allowing anyone to

maintenance, and storage of equipment.

It has been said, “The best safety device is an

approach the equipment.

Protective hose sleeves must cover all hydrau-

informed, careful operator.” We ask you to be

that kind of operator.

lic hoses within 20 inches of the operator and be

secured onto metal hose fittings. Replace hoses or

INSTALLATION

sleeves if damaged or if protective sleeve cannot

be properly positioned or secured.

This Loader Mounting Kit is to be used only for

Make sure all hydraulic hoses, fittings, and

the loaders and tractors specified in this manual.

valves are in good condition and not leaking before

Any other use or modification of this mounting kit

starting power unit or using equipment. Check and

may result in serious injury or death.

route hoses carefully to prevent damage. Hoses

Hydraulics must be connected as instructed in

must not be twisted, bent sharply, kinked, frayed,

pinched, or come into contact with any moving

this manual. Do not substitute parts, modify, or

parts. Operate moveable components through full

connect in any other way.

operational range to check clearances. Replace

After connecting hoses, check that all control

any damaged hoses immediately.

lever positions function as instructed in the Opera-

Always wear relatively tight and belted clothing

tor's Manual. Do not put into service until control

lever and equipment movements are correct.

to avoid getting caught in moving parts. Wear

sturdy, rough-soled work shoes and protective

Safety

instructions are

important! Read all

equipment for eyes, hair, hands, hearing, and head;

and respirator or filter mask where appropriate.

attachment and power unit manuals; follow all

safety rules and safety decal information. (Replace-

Do not modify or alter or permit anyone else to

ment manuals and safety decals are available from

modify or alter the equipment or any of its compo-

your dealer. To locate your nearest dealer, check

the Dealer Locator at www.WoodsEquipment.com,

nents in any way.

Do not allow bystanders in the area when oper-

or in the United States and Canada call 1-800-319-

ating, attaching, removing, assembling, or servic-

6637.) Failure to follow instructions or safety rules

can result in serious injury or death.

ing equipment.

Keep hands and body away from pressurized

Use a suitable lifting device of sufficient capac-

ity. Use adequate personnel to handle heavy com-

lines. Use paper or cardboard, not hands or other

ponents.

body parts to check for leaks. Wear safety goggles.

Keep all persons away from operator control

Hydraulic fluid under pressure can easily penetrate

area while performing adjustments, service, or

skin and will cause serious injury or death.

maintenance.

3 Safety

Loader Mounting Kit SR3 (11/1/2002)

211716 specifications

Woods Equipment is a well-established name in the agricultural and grounds maintenance industries, and their model 211716 continues this legacy of excellence. The Woods Equipment 211716 is a heavy-duty rotary cutter, ideal for users looking to manage brush, tall grass, and other foliage efficiently and effectively.

One of the standout features of the Woods Equipment 211716 is its robust construction. Made with a reinforced steel frame and high-strength materials, this rotary cutter is built to withstand the rigors of tough terrain and demanding conditions. The 211716 is capable of handling branches and brush up to 2 inches in diameter, making it suitable for a variety of land clearing tasks.

A key technology in the Woods 211716 is the quick-change blade system. This innovation allows for easy and rapid blade replacement, reducing downtime and maximizing productivity. The blades are high-carbon steel, designed to ensure longevity and maintain sharpness through extended use, which is crucial when tackling dense brush or tough undergrowth.

The rotary cutter features a generous cutting width, allowing for large swathes of grass and brush to be cleared in a single pass. This efficiency is further amplified by the cutter’s adjustable cutting height, giving users versatility according to their specific needs. Whether users are looking to maintain a manicured landscape or clear rough fields, the ability to easily modify the cutting height ensures optimal performance across different applications.

Another notable characteristic of the Woods Equipment 211716 is its safety features. The rotary cutter is equipped with chain guards and reinforced side skirting, reducing the risk of debris being thrown from the cutting area. This not only ensures the safety of operators and bystanders but also aligns with best practices in equipment operation.

The 211716 also boasts compatibility with a wide range of tractors, making it a versatile choice for both commercial and residential use. Its heavy-duty design and performance-oriented features make it suitable for landscapers, farm owners, and anyone requiring a reliable cutting tool.

In summary, the Woods Equipment 211716 rotary cutter combines robust construction, innovative technology, and user-friendly design, making it a premier choice for effectively managing brush and overgrown landscapes. Its high-quality materials, safety features, and versatility ensure that it remains a reliable workhorse in the field, meeting the demands of both professionals and enthusiasts alike.