Installing and Removing the Battery and Card
Load a
Make sure the card’s
Installing the Battery/Card
| 1 | Open the cover. |
|
| Slide the lever as shown by the |
|
| arrows and open the cover. |
| 2 Insert the battery. | |
|
| Insert the end with the battery |
|
| contacts. |
|
| Insert the battery until it locks in |
|
| place. |
3 Insert the card. | ||
|
| As shown in the illustration, face |
|
| the card’s label side toward the |
|
| camera back. |
|
| Insert the card straight in all the way. |
| 4 Close the cover. | |
|
| Press the cover until it snaps shut. |
|
| When you set the power switch to |
|
| <1>, the number of possible shots |
|
| (p.32) will be displayed on the LCD |
|
| monitor. |
28