IBM 1400 (2611) manual Grounding Requirements

Notes:

1.Use product-specific ESD procedures when they exceed the requirements noted here.

2.Make sure that the ESD protective devices you have been certified (ISO 9000) as fully effec

When handling ESD-sensitive parts:

ŸKeep the parts in protective packages until th

inserted into the product.

Ÿ Avoid contact with other people.

ŸWear a grounded wrist strap against your skin

eliminate static on your body.

ŸPrevent the part from touching your clothing. Mo

clothing is insulative and retains a charge eve you are wearing a wrist strap.

Ÿ Use the black side	of a grounded work mat t
a static-free work surface. The mat is		espec
useful when handling	ESD-sensitive devices.

ŸSelect a grounding system, such as those listed below, to provide protection that meets the sp service requirement.

Note: The use of a grounding system is desirab but not required to protect against ESD damage.

–Attach the ESD ground clip to any frame gro

ground braid, or green-wire ground.

–Use an ESD common ground or reference point when working on a double-insulated or battery operated system.

–You can use coax or connector-outside shells these systems.

–Use the round ground-prong of the AC plug o AC-operated computers.

Grounding Requirements

Electrical grounding of the computer is required f ator safety and correct system function. Proper g of the electrical outlet can be verified by a electrician.

Introduction15