Switching on, playback 2;...
To playback your music files on the player, download the files as .MP3 or .WMA files on the root directory of the player.Your KEY player can only playback files stored in this way. (See page
1Connect the remote control and headphones to the player as shown on page 7.
2Check that you have adjusted the function switch to the PLAYBACK/ DOWNLOAD position.
3Press and hold 2; for more than 2 seconds to turn on the player.
➜The indicator lights up orange briefly and playback starts from the last song played when you switched off the player.
TIP:
•If the function switch is in the OFF/ CHARGE position, you won’t be able to playback music!
•If no MP3/ WMA files are stored in the player, the player beeps and the indicator flashes orange before switching off.
Adjusting the volume
• Press repeatedly or press and hold on: + to increase volume
– to decrease volume
Pause, 2;
1 During playback, press 2; briefly to pause.
2 Press 2; briefly again to resume playback. ➜ The indicator flashes orange slowly during
pause.
Selecting a different track, ∞ , §
•During playback, press once or more on: ∞ to skip to previous track(s)
§to skip to track(s) forward
15