Samsung BD-C6500 BD-C6500/EDC, BD-C6500/XAA, BD-C6500/XEE, BD-C6500/XEF System, NOTE, NOTE, ￿NOTE, ￿NOTE, Setup, English, (See pages 31~44), •On : Anynet+ functions will work, •Off : Anynet+ functions will not work

System

Initial Settings

By using Initial Settings, you can set language, TV aspect and Network Settings, etc.

For more information on the settings, refer to the corresponding section in this user manual.

(See pages 31~44)

Internet@TV Screen Size

Set the Internet@TV Screen to the optimal size.

•Size 1 : Display smaller application icons, you may see some black on sides of screen.

•Size 2 : Display normal application icons, image may be too large for your TV screen.

•Size 3 : Display larger application icons, image may be too large for your TV screen.

Anynet+(HDMI-CEC)

Anynet+ is a convenient function that offers linked operations with other Samsung players with the Anynet+ feature.

To operate this function, connect this player to a Samsung TV with an HDMI cable.

You can operate this player using a Samsung TV remote control and start disc playback simply by pressing the PLAY ( ) button on the TV’s remote control.

For more information, please see the TV user manual.•On : Anynet+ functions will work.•Off : Anynet+ functions will not work.

￿NOTE

▪This function is not available if the HDMI cable does not support CEC.▪If your Samsung TV has an nlogo, then it supports the Anynet+ function.

▪Depending on your TV, certain HDMI output resolutions may not work.

Please refer to the user manual of your TV.

BD Data Management

Enables you to manage the downloaded contents from a Blu-ray Disc that supports the BD-LIVE service.

You can check the device information including the storage size, delete the BD data or change the Flash memory device.

Change Device allows you to select either the player’s Internal Memory or External Memory (connected USB Device).

If the data to be stored from BD-LIVE is greater than the size of the remaining memory or the Internal Memory is full, connect an External USB device, then select External Device in the menu.

Settings

Display	BD Data Management
Audio	Current Device	: Internal Flash Memory
System	Total Size	: 703MB
Network	Available Size	: 700MB
Language	Delete BD Data	\
Security	Change Device	: Internal Flash Memory
General
Support		"Select 'Return

Description of Device(Storage) Information on the Player•Total Size : Total size of the Device(Storage).•Available Size : Available size of the Device (Storage).

￿NOTE

▪In the external memory mode, disc playback will be stopped if you disconnect the USB device in the middle of the playback.

▪Only those USB devices formatted in FAT file system (DOS 8.3 volume label) are supported, and it is recommended to use USB devices that support USB 2.0 protocol, 4 MB/sec or faster read/write speed.

▪The Resume Play function may not work after formatting the storage device.

▪The total size of BD Data Management may differ, depending on the conditions.

Setup 05

English 37