Samsung CTN464KC01/XEO, CTN464NC01/XEO manual Connecting to the Mains Power Supply, Terminals

CONNECTING TO THE MAINS POWER SUPPLY

Before connecting, check that the nominal voltage of the appliance, that is, the voltage stated on the rating plate, corresponds to the available supply voltage. The rating plate is located on the lower casing of the hob.

Shut off power to circuit before connecting wires to circuit.

WARNING

The heating element voltage is AC 230 V~. The appliance also works perfectly on networks with AC 220 V~ or AC 240 V~.

The hob is to be connected to the mains using a device that allows the appliance to be disconnected from the mains at all poles with a contact opening width of at least 3 mm, eg. automatic line protecting cut - out, earth leakage trips or fuse.

WARNING

WARNING

WARNING

WARNING

The cable connections must be made in accordance with regulations and the terminal screws tightened securely.

Once the hob is connected to the mains supply, check that all cooking zones are ready for use by briefly switching each on in turn at the maximum setting with suit- able cookware.

When the hob is powered on for the first time, all displays light and the child safety lock is activated.

Pay attention (conformity) to phase and neutral allocation of house connection and appliance (connection schemes); otherwise, components can be damaged. Warranty does not cover damage resulting from improper installation.

If the supply cord is damaged, it must be replaced by a special cord or assembly available from the manufacturer or its service agent.

• 1N ~

• 2N ~

220-240 V ~

220-240 V ~

Green/Yellow

380-415

V ~

Green/Yellow

Black

Blue

Black

Blue

Gray

Brown

Gray

Brown

L

N

L1 L2

N

1N ~

2N ~

•2 x 1N ~

	220-240 V ~			220-240 V ~	Green/Yellow
Blue		Black				For correct supply connection, follow
						WARNING the wiring diagram attached near the
Brown			Gray			terminals.
	L1 N1		L2 N2

2 X 1N ~

10_ installing the hob

CTN464KC01_XEO_00330A-03-EN_130703.indd 10

03-Jul-13 10:01:14 AM