Playing a Disc
Before Play-Turn on your TV and set it to the correct Video Input by pressing TV/VIDEO button on the TV remote control.
-If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input.
After plugging in the player, the first time you press the DVD POWER button, this screen comes up: If you want to select a language, press a π/† button. (This screen will only appear when you plug in the player for the first time.)
If the language for the startup screen is not set, the settings may change whenever you turn the power on or off. Therefore, make sure that you select the language you want to use.
Once you select a menu language, you can change it by pressing the
English
Français
Deutsch
Español
Italiano
Nederlands
Playback1.Press the OPEN/CLOSE (
2.Place a disc gently into the tray with the disc’s label facing up.
3.Press the PLAY/PAUSE (
play, the player remembers where you stopped, so when you press PLAY/PAUSE (
will pick up where you left off.
Press the STOP (
Press the OPEN/CLOSE (
Press the PLAY/PAUSE (
-Screen stops, no sound.
To resume, press the PLAY/PAUSE (
Press the SEARCH (
-No sound is heard during slow mode.
-Press the PLAY/PAUSE (
Note
-If the player is left in the stop mode for more than one minute without any user interaction, a screen
saver will be activated. Press the PLAY/PAUSE (
-If the player is left in the stop mode for more than about 30 minutes, the power will automatically shut off. (Automatic
-If the player is left for about 5 minutes in pause mode, it will stop.
-This (
FUNCTIONS BASIC ●
English _15