Samsung DVD-P191 DVD-P191/EDC, DVD-P191/XEL precautions, 1.Setting up, 4.Disc, 3.Caution, 2.For your safety, 5.Environmental info

precautions

1.Setting up

-Refer to the identification label located on the rear of your player for its proper operat- ing voltage.

-Install your player in a cabinet with ade- quate ventilation holes. (7~10cm) Do not block ventilation holes on any of the compo- nents for air circulation.

-Do not push the disc tray in by hand.

-Do not stack components.

-Be sure to turn all components off before moving the player.

-Before connecting other components to this player, be sure to turn them off.

-Be sure to remove the disc and turn off the player after use, especially if you are not going to use it for a long time.

-The mains plug is used as a disconnect device and shall stay readily operable at any time.

2.For your safety

-This product utilizes a laser. Use of controls or adjustments or performance of proce- dures other than those specified herein may result in hazardous radiation exposure.

-Do not open covers and do not repair your- self. Refer servicing to qualified personal.

3.Caution

-Your player is not intended for industrial use but for domestic purposes. Use of this prod- uct is for personal use only.

-Apparatus shall not be exposed to dripping or splashing and no objects filled with liq- uids, such as vases, shall be placed on the apparatus.

-Exterior influences such as lightning and

static electricity can affect normal operation of this player. If this occurs, turn the player off and on again with the POWER button, or disconnect and then reconnect the AC power cord to the AC power outlet. The player will operate normally.

-When condensation forms inside the player due to sharp changes in temperature, the player may not operate correctly. If this occurs, leave the player at room tempera- ture until the inside of the player becomes dry and operational.

4.Disc

-Do not use record-cleaning sprays, ben- zene, thinner, or other volatile solvents that may cause damage to the disc surface.

-Do not touch the disc’s signal surface. Hold by the edges or by one edge and the hole in the center.

-Wipe the dirt away gently; never wipe a cloth back and forth over the disc.

5.Environmental info

-The battery used in this product contains chemicals that are harmful to the environ- ment.

-So, dispose of batteries in the proper man- ner, according to federal, state, and local regulations.

The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. This license is limited to private non-commercial use by end-user consumers for licensed contents. No rights are granted

for commercial use. The license does not cover

any product unit other than this product unit and the license does not extend to any unlicensed product unit or process conforming to ISO/OUR 11172-3 or ISO/OUR 13818-3 used or sold in combination with this product unit. The license only covers the use of this product unit to encode and/or decode audio files conforming to the ISO/OUR 11172-3 or ISO/OUR 13818-3. No rights are granted under this license for product features or functions that do not conform to the ISO/OUR 11172-3 or ISO/OUR 13818-3.

CAUTION: USE OF ANY CONTROLS, ADJUSTMENTS, OR PROCEDURES OTHER THAN SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE.

2_ precautions