reference
Firmware upgrade
IntroductionSamsung offers software upgrades to improve the performance of this unit, through the Samsung Internet Site (www.samsung.com).
Because the new mpeg4 codec continues to appear more often. What improvements are made depends on the software upgrade you are using as well as the software that your
Write the downloaded file onto a blank
1.You have to download a new file through Download Center on the Samsung Internet Site (www.samsung.com).
2.Write the file to Disc using
Note
-File System
-Character set ISO 9660
-Finalized, single session
-Write speed low
Upgrade procedure1.Open the disc tray. Place the disc on the tray. Close the tray. The Firmware upgrade screen appears.
2.Press the √/® buttons to select Total, then press the ENTER button.
Firmware upgrade starts-In the middle of the writing, the tray will open automatically. After taking out the disc, please wait for about 2 minutes.
-If the unit was succesfully updated, the unit will turn off and on after closing the tray automatically. When the unit turns on, this screen will display.
3. Press the number buttons to select the desired language
English
Français
Deutsch
Español
Italiano
Nederlands
Note
-If the “Select Menu Language” doesn’t appear, please contact the “Samsung Service Center”.
-Do not press any button or unplug the power during upgrade.
-The upgrade procedure may change, refer to the web site (www.samsung.com).
REFERENCE ●
English _29