Rear Panel
2
SETUP ●
1 | 3 | 4 | 5 |
|
|
|
|
1.SCART JACK
-Connect to a TV scart input jack.
2.AUDIO OUT JACKS-Connect to the Audio input jacks of your television or audio/video receiver.
3.VIDEO OUT JACK-Use a video cable to connect to the Video input jack on your television.
4.COMPONENT VIDEO OUT JACK-Use these jacks if you have a TV with Component Video in jacks. These jacks provide PR, PB and Y video.
-If
-If
-Use coaxial digital cable to connect to a compatible Dolby Digital receiver.
-Use coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPEG2 or DTS decoder.
Note
-See pages
English _7