CO N N E C T I O N S
Connection to a TV (Progressive)1
Using component video cables (not included), connect the COMPONENT VIDEO OUT terminals on the rear of the DVD
player to the COMPONENT IN terminals of your TV.
2
Using the audio cables, connect the | AUDIO (red and white) | |
OUT terminals on the rear of the DVD player to the | AUDIO (red | |
and white) IN terminals of your TV. |
|
|
Turn on the DVD player and TV. |
|
|
RED BLUE GREEN
3
Press the input selector on your TV remote control until the Component signal from the DVD player appears on the TV screen.
RED WHITE
Audio Cable
Component cable (not included)
RED | WHITE | RED BLUE GREEN |
4
Set the Video Output to Component
Setup menu. (See pages 53 to 54)
To see the progressive video output,-Consult your TV User’s Manual to find out if your TV supports Progressive Scan.
If Progressive Scan is supported, follow the TV User’s Manual regarding Progressive Scan settings in the TV’s menu system.
-Depending on your TV, the connection method may differ from the illustration above.
Note
-What is "Progressive Scan"?
Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality.