Samsung SCC-C6475P manual 23

■And assign the user PC’s window network setting as following example.

Example) IP: 192.168.1.201

Subnet mask: 255.255.255.0

Gateway: 192.168.1.1

■Execute the IPinstaller.exe in user PC and verify the IP, Subnet Mask and Gateway connected to the SCC-C6475(P).

If the indicated content in the camera list is not the same as follows, fix the setting as the follow Example.

Example) <SCC-C6475(P)>	<User PC>
IP: 192.168.1.200	IP: 192.168.1.201
Subnet mask: 255.255.255.0	Subnet mask: 255.255.255.0
Gateway: 192.168.1.1	Gateway: 192.168.1.1
HTTP Port: 80

■After completing the IP setting in the IPinstaller, enter the password and click the “Apply” button. And the SCC-C6475(P) will reboot automatically.

●Password is the root user’s log in Password to access the SCC-C6475(P).

●Password is set as basic value ‘4321’ when it is shipped.

■User access http://192.168.1.200 by using the PC internet browser.

■Accessing SCC-C6475(P) by using the internet browser, Log In page as follow appears.

E

-User ID to Log In is set to a basic value ‘root’ when it was shipped and the password is ‘4321’.

■Log in at SCC-C6475(P) and the main screen that user can see images appears.

■After checking if the camera image works well, click the setup mode button in the right up side of the main screen.

3-17 3-18