Samsung WW10M86INOA manual

Detergent drawer guidelines
	DC68-03704R-02
Auto dispenser

The automatic dispenser models provide a three-compartment dispenser: two compartments for auto dispensing and another part for manual input. With Auto Detergent and Auto Softener enabled, the washing machine dispenses an adequate amount of detergent or fabric softener for each load. See below for details:

Water hardness (default: 2)

1. To select a water hardness level, press and hold Dose per

Wash to cycle through the settings:

1 (soft water) > 2 (medium water) > 3 (hard water).

Auto Detergent: Use liquid detergent only. Auto Softener: Use fabric softener only.

Detergent: If necessary, add manually as instructed by the detergent manufacturer.

NOTE

ꞏꞏ To use the manual dispenser, make sure the auto dispenser is turned off. Keep pressing Dose per Wash until the Auto dispense indicators are off.

1	2	3
soft	> medium > hard
water	water	water

Softener (default: Standard)

2. When complete, press and hold Dose per Wash for

3 seconds to confirm your changes.

To select an input level, press Dose per Rinse to cycle through the settings: Less > Standard > More.

Less > Standard > More > Off

Settings

Less > Standard > More

If necessary, you can change the default settings as follows.

Detergent (default: Standard)

Less > Standard > More

To select an input level, press Dose per Wash to cycle through the settings: Less > Standard > More.

NOTE

ꞏꞏ If you choose More, the rinse process will be added once more.

Concentration level (default: 1)

1 2 3 Normal > 2 (x2) > 3 (x3)

NOTE

1.To select a concentration level, press and hold Dose per Rinse to cycle through the settings:

1 (Normal) > 2 (x2) > 3 (x3).

NOTE

ꞏꞏ The concentration level is marked on the product package.

2.When complete, press and hold Dose per Rinse for

3 seconds to confirm your changes.

ꞏꞏ If you select WOOL , the Dose per Wash and Dose per Rinse buttons will be disabled automatically. However, you can enable the function(s) manually after selecting a cycle.

ꞏꞏ If the refill indicator continues to turn on after refilling the detergent/softener, press Start/Pause (Hold to Start). The indicator turns off about 10 seconds later.

ꞏꞏ The Refill indicator turns on because it is designed to remind you of the necessity for replenishment of detergent. This is not a system failure.

※ For details, refer to the user manual.

WW8800M_DC68-03704R-02_EN.indd 1 2018-01-31 ￿￿ 4:03:48