Operations
Control panel
02 |
|
|
| 10 |
|
|
|
| |
|
|
|
| 08 |
01 |
|
|
| 11 |
|
|
| 09 | |
|
|
|
| |
03 | 04 | 05 | 06 | 07 |
01 | Cycle Selector | Turn the dial to select a cycle. | ||
|
|
| ||
02 | Display | The display shows current cycle information and estimated time | ||
remaining, or an information code when a problem occurs. | ||||
|
| |||
|
|
| ||
03 | Temp. | Press to change the water temperature for the current cycle. | ||
|
|
| ||
04 | Rinse | Press to change the rinse count for the current cycle. You can set | ||
the rinse count to a max of 5, depending on the cycle. | ||||
|
| |||
|
|
| ||
|
| Press to change the spinning speed for the current cycle. The | ||
|
| revolutions per minute (RPM) differs with the model. | ||
|
| • | Rinse Hold : The final rinse process is suspended so that the | |
|
|
| laundry remains in the water. To unload the laundry, run a | |
|
|
| drain or spin process. | |
05 | Spin | • | No Spin : The drum does not rotate after the final drain | |
| process. | |||
|
|
|
•Spin Only
3 seconds. When the cycle time and spinning speed appear, press
| Press to select an option from Intensive, and Pre Wash. Press |
06 Options | again to deselect. |
•Availability of the options depends on the cycle.
Operations
English 33
|
| ||
|
| ||
|
|
|
|