Hold Function
While the Hold switch on your yepp player is on
Buttons on the yepp won't work. Each time a button is pressed, “Hold” will appear for a short time on the display only the buttons on your remote controller will work.
While the Hold switch on your remote controller is on
The
Setting the Modes
Each time the EQ/REP button of your remote controller is pressed and held, the modes will change in the order of REP, ALL, SHU and INT.
◆ REP mode | : Repeats current track. |
◆ ALL mode | : Repeats all the tracks. |
◆SHU mode : Enables random playback.
◆ INT mode : Enables you to repeat the first 10 seconds of the tracks saved (for 10 seconds each).
English
Repeating Tracks/Section
Press the “A ↔ B” button of your remote controller to repeat the track or section that you selected. Setting 'Repeat Track' needs a minimum of two seconds of play time.
1Press the A ↔ B button of your remote control at the start point of the track or section that you want to repeat. Then, 'B' blinks on the display panel.
2Press this button again at the end point of the track or section that you want to repeat.
Note The section from point A to point B that you selected will automatically be repeated. To cancel this function, press the A↔ B button again. While tracks/sections are repeated, only the Stop and A↔ B buttons work.
Using the Equalizer
Each time the EQ/REP button of your remote controller is pressed, the equalizer modes will be changed in the order of Classic, Jazz, Rock and Normal.
Normal mode is not indicated on the panel.
Using the 3D Sound
Press the 3D buttonto add Surround 3D sound effect to four different modes (Normal, Classic, Jazz, Rock). The surround 3D sound is available only in the MP3 mode.
5