National Instruments and PCI-485/4 Isolated manuals

Computer Equipment > Tablet

When we buy new device such as National Instruments and PCI-485/4 Isolated we often through away most of the documentation but the warranty. Very often issues with National Instruments and PCI-485/4 Isolated begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Tablet National Instruments and PCI-485/4 Isolated is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Tablet on our side using links below.

National Instruments and PCI-485/4 Isolated Quick Start

19 pages137.93 Kb

NOTE TO USERS
USING PCI SERIAL WITH LINUX
- Contents
- 2Related Documentation
  - Contributions
- Gather What You Need to Get Started
- 4Quick Start
- 5Setup
  - Create Devices
  - MAKEDEV Example
  - Find Interface Information
  - 6Assign Serial Driver
  - setserial Example
  - 7Assign Serial Drivers Using PCI-485
  - Assign Serial Drivers Using PCI Eight-Port Interfaces
  - Enable PCI Interrupt
- 8Configuration
  - View Your Hardware Resources
  - Enable FIFO Buffers
  - 9FIFO Example
  - Configure struct termios
- 10Configure PCI-485
  - Select Transceiver Mode
  - rs485 Example
  - Lower Baud Rate Selection
- 11Test the Setup
- 12Troubleshooting and Common Questions
  - Error Codes
  - 13Common Questions
- 15Assign Driver
  - 3. Add the following segment to the end of the file (not necessary for Debian distribution):
- 17Sample /etc/rc.d/rc.serial File

Also you can find more National Instruments manuals or manuals for other Computer Equipment.