Renesas Family E10A-USB manuals

Computer Equipment > Network Card

When we buy new device such as Renesas Family E10A-USB we often through away most of the documentation but the warranty. Very often issues with Renesas Family E10A-USB begin only after the warranty period ends and you may want to find how to repair it or just do some service work. Even oftener it is hard to remember what does each function in Network Card Renesas Family E10A-USB is responsible for and what options to choose for expected result. Fortunately you can find all manuals for Network Card on our side using links below.

Renesas Family E10A-USB User Manual

57 pages388.49 Kb

Revision Date: Nov. 02, 2005
Rev.1.00
SuperHTM Family E10A-USB Emulator
- 3Keep safety first in your circuit designs!
- Notes regarding these materials
- 5Contents
- 7Section 1 Connecting the Emulator with the User System
  - 1.1 Components of the Emulator
  - 81.2 Connecting the Emulator with the User System
  - 91.3 Installing the H-UDI Port Connector on the User System
  - 1.4 Pin Assignments of the H-UDI Port Connector
    - 10
      - 1. Input to or output from the user system. 2. The symbol (/) means that the signal is active-low.
    - Figure 1.1 Pin Assignments of the H-UDI Port Connector (36 Pins)
      - H-UDI port connector (top view)
      - H-UDI port connector (front view)
      - (Pin 1 mark)
      - Notes:
        H-UDI port connector
        (top view)
      - AA14 V14 AB14 W13 V13
        AB15
        Y13 W14 V15 Y14 AA13 V16 V16 AB17 E11
        W15
    - 11Pin 1
    - Pin 8 Pin 7
      - Figure 1.2 Pin Assignments of the H-UDI Port Connector (14 Pins)
    - Pin 14
      - this pin and the MPMD pin is set to 0, do not connect to GND but to the MPMD pin directly.
      - the user system if required, as shown in figure 1.4.
        Unit: mm
  - 121.5 Recommended Circuit between the H-UDI Port Connector and the MPU
    - 13
    - 15
- 17Section 2 Software Specifications when Using the SH7343
  - 2.1 Differences between the SH7343 and the Emulator
  - 222.2 Specific Functions for the Emulator when Using the SH7343
    - 23
    - Table 2.5 Dialog Boxes for Setting Event Conditions
    - 24
    - Table 2.5 Dialog Boxes for Setting Event Conditions (cont)
    - 25
    - 26
    - Table 2.6 Sequential Event Conditions (cont)
    - 47
    - Table 2.12 Measurement Items
    - 52
    - 56http://www.renesas.com
- 57SuperH
  - TM

Also you can find more Renesas manuals or manuals for other Computer Equipment.