Siemens S7 manual

Contents

Main Contents Page Introduction Notational conventions ! Important notes ! Safety Cleaning notes Transport notes Manufacturers notes Important note on power cable For devices which are mounted on a desk or table, type SVT or SJT cable sets may be used. The cable set must be selected according to the rated current for your device. Disposal and recycling Checking the contents of the consignment Installing an ergonomic video workstation Setting up the monitor Lay the monitor on its face on a soft Place the monitor in an upright position. Fold out the monitor base. Slide the latch on the base to the middle Installation/Deinstallation of the loudspeaker module ! Be sure that the monitor and the computer are switched off. ! Anti-theft protection Operation of the monitor Switching the monitor on/off First switch the LCD monitor on with the ON/OFF switch (1). Then switch on the computer. Notes on power management Changing the monitor settings Basic monitor settings with the floppy disk supplied Monitor settings using the OSD menu MENU DOWN UP AUTO POWER Press the MENU button to activate the OSD menu. If necessary, use the DOWN or UP button Press the MENU button to activate the Page Removing the monitor base ! Lay the monitor on its face on a soft surface. ! The monitor surface is susceptible to scratching! Push a screwdriver through the opening on Notes on ergonomic colour adjustment Technical data VESA-DDC-compatible VGA interface Preset operating modes Power supply plug +12 V DC 0 V D-SUB connector Trouble shooting Adjust the position and the size of the display and save your settings (see "Monitor set tings If necessary, then adjust the picture definition with the PHASE function. FCC Class B Compliance Statement Consult the dealer or an experienced radio/TV technician for help. Declaration of Conformity