Upgrading from the Command Line Interface 81
The bootrom firmware may not require upgrading for every software
upgrade, therefore there may not be a new bootrom (.btm) file to
download.
File Distribution
The following commands enable you to distribute your downloaded files
to the remaining Switches in the fabric:
1To copy the new software file to each Switch in the fabric, enter:
copy unit1>flash:/s3n03_01_00s168.app unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
2To copy the new default configuration file to each Switch in the fabric,
enter:
copy unit1>flash:/3ComOScfg.def unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
3To copy the new Web user interface file to each Switch in the fabric,
enter:
copy unit1>flash:/s3p03_01_00.zip unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
4To copy the new Bootrom firmware file to each Switch in the fabric,
enter:
copy unit1>flash:/s3o002_012_000.btm unit2>flash:/
Replace unit2 with unit3 and so on for each Switch in the fabric.
Command Line Interface Switch Setup
1To set the Switch to boot from the new software you have downloaded,
enter the following:
boot boot-loader unit1>flash:/s3n03_01_00s168.app
To set the remaining Switches in the fabric to boot from the new
software, replac e unit1 with unit2 and so on for each Switch in the
fabric.
2To set the Switch to load the new bootrom firmware, enter:
boot bootrom unit1>flash:/s3o002_012_000.btm