3M 800rf, 40800 To reduce the risk associated with impact hazards B10 B1 B2, V11B V11A, Vsa Vsb

7-INSTALLATION (continued)

(infeed conveyor attachment continued)

Approach the infeed conveyor to the machine and fix it using the screws previously removed (Figure 7-11).

B10, B1, B2 infeed conveyor photocells connections

(Figure 7-12).

WARNING

•To reduce the risk associated with mechanical and electrical hazards:

−Allow only properly trained and qualified personnel to operate and/or service this equipment

Insert the B10, B1 photocells screw connector in the plug on the sealing machine bench as shown. Connect the cable with screw connector deriving from the machine to the relative B2 photocell on the infeed conveyor (Figure 7-13).

WARNING

•To reduce the risk associated with impact hazards:

Figure 7-11

B10

Figure 7-12

B1 B2

B10

B1

−Always use appropriate supporting means when working under the upper drive assembly

Connect air tubes from the sealing machine to the conveyor centering guides cylinder connectors (1) and to conveyor belt cylinders (2). Connects the air tubes to the connectors above mentioned pay attention to the reference numbers (Figure 7-14).

800rf-NA 19

			B2
Figure 7-13
				V11B	V11A
		B2
	2					2

			1
Figure 7-14
	VSA	VSB

2012 March