3M™ Multimedia Projector MP8790
AUTO Menu |
| MENU |
|
| ||
| KEYSTONE | EXECUTE | ||||
|
|
| MAIN | ADJUST | ||
|
|
| POWER OFF |
| ||
|
|
|
| |||
With the AUTO menu, the four items shown in the Table below can | INPUT | ONE TOUCH |
| |||
AUTO |
|
| ||||
be performed. |
|
| SCREEN |
|
| |
|
| OPTION |
|
| ||
Please perform each operation in accordance with the instructions | WIRELESS |
|
| |||
: SELECT |
|
| ||||
in the Table. |
|
| Example : AUTO Menu | |||
|
|
| (ADJUST) |
| ||
AUTO Menu |
|
|
|
|
| |
Item |
| Description |
|
|
| |
|
|
| ||||
| Auto Adjust (for RGB): Automatically adjusts H POSITION, V POSITION, H | |||||
| PHASE, and H SIZE. Use this function with the maximum window size. |
| ||||
| Auto Adjust (for | |||||
| appropriate signal mode depending on input signals. This is only performed if | |||||
ADJUST | AUTO is selected on the VIDEO menu item ( 28 ) of the INPUT menu. |
| ||||
• This function may not be available with a PAL60 signal and certain other | ||||||
| ||||||
| signals. |
|
|
| ||
| • The AUTO mode operation requires approximately 10 seconds. |
|
| |||
| • For COMPONENT VIDEO, the signal type is identified automatically even if this | |||||
| function is inactive. For more information on HDTV signals, see HDTV. ( 28 ) | |||||
Automatic keystone distortion correction:
You can automatically correct vertical keystone distortion corresponding to the angle (forward/backward tilt) at which the unit is set up.
• If the projection screen is inclined, or if the projector is angled downwards, it
KEYSTONE 
may not be possible to make the correct adjustment when V: INVERT or H&V: INVERT is selected under the MIRROR item of the MAIN menu.
•When the zoom adjustment is set to the TELE side, automatic correction may be excessive. The automatic correction function should be used with zoom set to WIDE whenever possible.
| Adjust POWER OFF Time: |
|
| ||
| Long (MAX. 99 min.) | Short (Min. 1 min.) | (DISABLE: 0 min.) | ||
POWER OFF | If the time set here passes without valid signal input (there is no signal input, or | ||||
signal input is out of specifications), the standby mode is set (see "TURNING | |||||
| |||||
| ON THE POWER" | 15 ). This function is inactive when DISABLE (0 min.) is | |||
| selected. |
|
|
| |
|
|
| |||
| Enabling/disabling the KEYSTONE | function using the ONE TOUCH | |||
| button: |
|
|
| |
| TURN ON | TURN OFF |
|
| |
ONE TOUCH | Pressing the ONE TOUCH button will automatically retrieve pictures and | ||||
automatically adjust the screen (see “ADJUSTING SCREEN WITH ONE- | |||||
| |||||
| TOUCH” 23 ), and you can also set the function to execute KEYSTONE | ||||
| (see above in this table) simultaneously when pressed. KEYSTONE will be | ||||
| executed if TURN ON is selected. |
|
| ||
© 3M 2002. All Rights Reserved. | 29 |