19
To print and collate multiple copies
1Press + .
2Select the number of copies of the group of labels to
print and press .
3Select All to print all of labels in the group.
4Press .
5Select one of the following:
•Yes to print collated.
•No to print normally.
6Press to begin printing.

Printing Separator Lines between Cells

For multi-cell labels, such as breaker and module labels,
you can choose whether or not to print a separator line
between each of the cells. By default, separator lines are
printed between cells.
To turn off printing of separator lines
1Press + .
2Select Print options and press .
3Select Separator lines and press .
4Select No and press .

Pausing Between Labels

When printing multiple copies, the printer pauses after
printing each label so you can cut the label. You can turn
this feature off to have the labels print continuously.
To print continuously
1Press + .
2Select Print options and press .
3Select Pause to cut and press .
4Select No and press .

Advancing the Label

To add additional blank space to the beginning or
end of your label, you can advance the label in 1/4”
increments.
To advance the label
1Press + .
2Press to advance the label.

Adjusting the Print Contrast

Depending on the label material you choose, you may
need to lighten or darken the printed text on the label.
To adjust the print contrast
1Press + .
2Select Print options and press .
3Select Print contrast and press .
4Press or to increase or decrease the
print contrast.
5Press .
6Repeat as necessary until you are satisfied with the
print quality.
Cleaning Your Printer
Your printer is designed to give you long and trouble-free
service, while requiring very little maintenance.
Clean your printer from time to time to keep it
working properly.
To clean the cutter blade
1Remove the label cassette.
2Press and hold the cutter button to expose the
cutter blade.
3Use a cotton ball and alcohol to clean both sides of
the blade.
The cutter blade is extremely sharp.Use caution when
cleaning.
To clean the print head
1Remove the label cartridge.
2Remove the cleaning tool from inside the label
cartridge door.
Figure 7
3Gently wipe the padded side of the tool across the
print head. See Figure 7.