23
Multifunctional settings
EASY Menu
Item Description
ASPECT Using the buttons ◄/► switches the mode for aspect ratio.
See the ASPECT item in the IMAGE menu (28).
MODE
Using the buttons ◄/► switches the mode of picture type. The
modes of picture type are combinations of a mode of GAMMA and
a mode of COLOR TEMP. Choose a suitable mode according to the
projected source.
NORMAL CINEMA DYNAMIC
NORMAL: (COLOR TEMP = MIDDLE) + (GAMMA = #1 DEFAULT)
CINEMA: (COLOR TEMP = LOW) + (GAMMA = #2 DEFAULT)
DYNAMIC: (COLOR TEMP = HIGH) + (GAMMA = #3 DEFAULT)
• When the combination of GAMMA and COLOR TEMP differs from
pre-assigned modes above, the display on the menu for the MODE
is “CUSTOM”. Please refer to the GAMMA (25) and COLOR
TEMP (26) items in the PICTURE menu.
• When this function is performed, a certain extra such as a line
may appear.
BRIGHTNESS Using the buttons ◄/► adjusts the brightness.
See the item BRIGHTNESS in the PICTURE menu (25).
CONTRAST
Using the buttons ◄/► adjusts the contrast.
See the item CONTRAST of section PICTURE menu
(25).
COLOR Using the buttons ◄/► adjusts the strength of whole color.
See the COLOR item in the PICTURE menu (26).
TINT Using the buttons ◄/► adjusts the tint.
See the TINT item in the PICTURE menu (26).
SHARPNESS
Using the buttons ◄/► adjusts the sharpness.
See the SHARPNESS item in the PICTURE menu
(26).
WHISPER Using the buttons ◄/► turns off/on the whisper mode.
See the WHISPER item in the SETUP menu (32).
With the EASY MENU, items shown in the table below can
be performed.
Select an item using the cursor buttons ▲/▼ on the
projector or remote control. Then perform it referring to the
following table.
EASY MENU
CONTRAST
ASPECT 4:3
BRIGHTNESS
MODE NORMAL
COLOR
+0
+0
+0
TINT +0
SHARPNESS +3
WHISPER NORMAL
RESET
FILTER TIME 0
LANGUAGE ENGLISH
Go To Advance Menu...
MIRROR NORMAL