SETTING THE EURO CONVERSION FEATURE
__________________________________________________________________
CONVERSION FEATURE: Useful along Border States for currency conversion
The Euro Conversion feature provides an automatic method of currency conversion. It establishes one currency as the Local currency and another currency as the converted currency. Once the rate is established, it will remain the rate unless changed. This feature does not use a daily exchange rate but is established through the following programming steps. The rate can be changed as frequently as one would want to change the rate, either daily, weekly, monthly or annually.
There are a few steps to set up the Euro Conversion feature.
-Activate/Disable the System
-Print the Currencies to be printed
-Establish the Local/Euro Currency as Standard
-Setting the Conversion Rates
Activate/Disable the Euro Conversion Feature:
1.If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has been assigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.
2.Type [7]
3. | Enter either [0] or [1] [0] disables the feature; [1] activates the feature. |
4. | Press the [RA/Euro] key to finish. |
Print the Currencies to Be Printed:
1.If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has been assigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.
2.Type [9]
3. | Enter either [0] or [1] [0] print both currencies; [1] print only tendered currency. |
4. | Press the [RA/Euro] key to finish. |
Establish the Local/Euro Currency as Standard:
1.If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has been assigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.
2.Type [10]
3. Enter either [0] or [1] [0] = Local; [1] Euro.
4. Press the [RA/Euro] key to finish.
Setting the Conversion Rates:
2.If needed, enter the program mode: Move the Control Switch to the "PRG" position. If a security code has been assigned, enter the number and press the [CHARGE] key now. If not, continue with Step #2.
3. | Type [0 - 8] | |
4. | Type [ |
5.Type [0.00000001 - 999999] this is the rate of conversion. See example below.
6.Press the [VOID] key to finish.
In the above step you establish the rate of the local currency and the rate of the converted currency. For instance, for use along US/Canadian borders, the local currency is US dollars (USD) and the converted currency is Canadian dollars (CND); the conversion rate might be 1 USD = 1.5 CND. To program this example, enter:
1 (for USD) | 2 (for CND) | 000015 (for conversion rate) | [VOID] |
abcoffice
26
www.abcoffice.com