SETTING UP AND MAINTAINING THE CASH REGISTER
__________________________________________________________________
SETTING UP YOUR CASH REGISTER
IMPORTANT - Please read this section carefully before attempting to operate the cash register or set the programs.
1.Place on a level surface to permit smooth operation of the cash register.
2.Plug in the electrical connection to an appropriate outlet.
3.Install batteries. (See Page 9) Do not install batteries unless the register is plugged in.
4.Install paper. (See Page 10)
5.Set desired program options using Quick Start (Page 12).
6.Set the Control Switch to R1 (journal record) or R2 (customer receipts).
7.The machine is ready for cash register transactions.
MAINTAINING THE CASH REGISTER
-Never cover the cash register when turned on. Doing so will prevent proper cooling of the electronic components.
-Cover the register when not in use to protect components from dust.
-Take care to keep all liquids away from the machine to avoid spills which could damage electronic components.
-To clean, use a soft, dry cloth. Do not apply organic solutions such as alcohol.
-Your cash register should be kept in areas free from dust, dampness or extreme hot or cold temperatures.
-If stored in extreme temperatures (below 32 degrees or above 104 degrees Fahrenheit), allow the temperature inside the register to reach room temperature before turning on.
-DO NOT attempt to pull the paper tape when printing or installing paper. Always use the [Feed] key to advance the paper. Pulling the tape could damage the print mechanism.
-If electronic service is necessary, an authorized service center is recommended.
-Familiarize yourself with the safety statements on Page 2.
3
abcoffice www.abcoffice.com