Removing the CardBus Dual-Speed PC Card

It’s quite different for various computer mechanical designs. Please refer to the PC Card removal instruction in the document for your notebook computer.

Connecting and Removing the Cable of Media Coupler to the CardBus PC Card

Grasp the PC Card 15-pins connector at the end of the media coupler with the pointing triangle facing upward. Gently insert it into the mating connector on the PC Card until it clicks in place at both sides.

Attention should be paid when removing the 15- pins connector. Please press the both sides of the connectors before dragging it out of the PC Card.

Connecting to the Network

Connect unshielded twisted pair (UTP) cable to the RJ-45 connector of media coupler before loading any network driver.

Note: This is not for telephone line connection.

•For operation in the100Mbps (100Base-TX) Ethernet network, a Category 5 unshielded twisted pair(UTP) cable should be used to connect between media coupler and 100Mbps hub or switch.

•For operation in the 10Mbps (10Base-T) Ethernet network, Category 3, 4 or 5 unshielded twisted pair (UTP) cable could be used to connect between the media coupler and a 10Mbps hub or switch.

- 2 -