SETPOWER Utility
Using the SETPOWER utility, you can also set the BatteryPro
power-savings level at any MS-DOS prompt. For example, at
the C:\> prompt you can type
SETPOWER /Ln
where n is the power-saving level (0 through 4) you want to
use. You can also include this command line in any batch
file (AUTOEXEC.BAT) you create to load an application.
Laptop Manager can automatically issue this command if
you configure an application’s loading process using the
Laptop Manager Change Menu.
Note: SETPOWER and all other BatteryPro utilities furnished
with your computer are loaded on the hard disk at the
factory under the UTILS directory with the MS-DOS PATH
command already in the AUTOEXEC.BAT file.
If you want to know the current and maximum power
levels, at the C:\> prompt type
SETPOWER /S
and press Enter. SETPOWER displays the current setting, 0
through 4, and the maximum available setting.
Note: You can also use the Dates utility to display the
current setting of BatteryPro.
SETPOWER Utility
5-10 Power-Saving Utilities