
n
Note: Do not use the Go function to execute a terminate-
and-stay-resident (TSR) program. LFM cannot reload itself
when you exit the TSR program, and it displays an error
message. The MS-DOS PRINT program is an example. If you
intend to use PRINT, install it in your AUTOEXEC.BAT file so
the resident portion of PRINT will load when you start the
computer.
F10 Setup Key
Pressing F10 at the LFM main menu causes LFM to display
a Setup Commands menu at which you can select one of
three submenus described in this section to configure LFM
operating features.
Pressing F1 causes LFM to display a Help screen describing
the setup functions.
When you complete your changes to each menu, press ESC
to return to the Setup Commands menu. Then press ESC
again and answer the “Save changes?” prompt to return to
the LFM main menu.
Function Key Commands
7-12 Laptop File Manager