Chapter 3 - BIOS Utility 3-27
Setup Password
Enter your new Password twice. Password
may be up to 7 characters long.
Enter Password .................[XXXXXXX]
Enter Password again ...........[XXXXXXX]
Set or Change Password
4. Type a password. The password may consist of up to seven characters. Then press
.
Be very careful when typing your password
because the characters do not appear on the
screen.
5. Retype the password then press .
6. After setting the password, highlight the Set or Change Password option.
7. Press to return to the System Security screen.
8. Press to return to the main menu.
9. Press to exit the BIOS utility. A dialog box appears asking if you want to save
the CMOS data.
10. Select Yes to save the changes and reboot the system.
11. After rebooting, turn off the system then open the housing.
12. Set switch no. 2 of SW1 to On to enable the password function.